re: Question about 'Troubleshooting Driver Problems' Sunday, March 9, 2003 at 7:07 am Windows 2000 Annoyances Discussion Forum Posted by Paul (263 messages posted) If you have both drives on the same ide cable, try making your primary drive (burner) the master on ide2, The other drive the slave on ide1 after the drive with the os. If you have a 2nd harddrive make that the slave on ide 2. Most systems do not like two cd/cdrw/ cdrom devices on the same ide. Even if it has ran like that for a while I would still switch the positions. On Sunday, March 9, 2003 at 3:41 am, DARRIN QUERIN wrote: >I have a question about Troubleshooting >Driver Problems: > >I am currnetly running WIN2000. The other day after rebooting my computer, both >my 2 CD drives are not present on the "my computer" page. Looking at the properties >page on the device manager, states that windows is unable to load the drivers for >these devices (code31). I have tried removing and reinstalling both drives but >am thinking that a reformatt is the only solution - can anyone help???? > Written in response to: Question about 'Troubleshooting Driver Problems' (DARRIN QUERIN: Sunday, March 9, 2003 at 3:41 am) There are presently no replies to this message. All messages in this thread [show all] Question about 'Troubleshooting Driver Problems' (DARRIN QUERIN: Sun, Mar 9, 2003, 3:41 am) re: Question about 'Troubleshooting Driver Problems' (dns: Sun, Mar 9, 2003, 4:50 am) re: Question about 'Troubleshooting Driver Problems' (Paul: Sun, Mar 9, 2003, 7:07 am) re: Question about 'Troubleshooting Driver Problems' (Lisa: Mon, Mar 17, 2003, 12:57 pm) re: Question about 'Troubleshooting Driver Problems' (Bill Melater: Thu, May 8, 2003, 9:40 am) re: Question about 'Troubleshooting Driver Problems' (l.billard: Fri, Jun 13, 2003, 6:12 am) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 2000 Discussion Forum