|
|
|
re: Voume too large when trying to format disk.
Thursday, December 30, 2004 at 7:55 am
Windows 2000 Annoyances Discussion Forum
Posted by DEX
(11739 messages posted)
Clint
Try one more time
Set the new 80gig as master (see the jummpers setting on the HD)
Plug the ribbon cable into the number one slot on the MB and the red line to the
number one pin on the MB and the HD..
Then reboot in to your BIOS and then run Det.the HD item on the bios list.
It should find it and must b/4 you can use it...
If it finds it your set to save and exit the BIOS setup.
If it Can't find it replace drive..but don't set it for NONE
You can some times use the User Define to set it up, and the setting for it should
be on the HD also..
But with most of the computers now days should pick it up with out your help.
On Thursday, December 30, 2004 at 7:28 am, Clint Heintzelman wrote:
>I tried the ME boot disk. I went to BIOS and selected "Auto" for primary disk drive
>select. It sat forever. I changed the setting to "none" and it went through the
>boot up all the way to A:. I typed in fdisk and it came back with ---- "no hard
>disk present". As always thanks for you help thus far, Dex.
>
>
>
|
All messages in this thread [show all]
 | | |  | re: Voume too large when trying to format disk. (DEX: Thu, Dec 30, 2004, 7:55 am) |
| |
| |
Return to the Windows 2000 Discussion Forum
|
|
|
|
