re: Question about 'Top reasons for random, fatal crashes in Windows XP and Windows 2000'
Thursday, April 21, 2005 at 8:26 pm
Windows 2000 Annoyances Discussion Forum
Posted by AManDotCom
(3 messages posted)
OK...and your question is.....?
On Thursday, April 21, 2005 at 6:10 pm, Peter A. Goodwin wrote:
>I experienced almost daily crashes for the first seven
>months on a new motherboard and hardware. It finally
>dawned on me that the consistent comments on the
>various bug checks was "possible memory error". I
>obtained a really good memory diagnostic (GoldMemory
>v6.68) and found that several hundred memory locations
>were experiencing bit-15 picks or bit-17 drops. Just by
>chance, I moved my 512-Mb module from one memory
>socket to another, and the problem disappeared!! I
>haven't had a crash in the last month. Could've been
>anything, but I suspect that it had something to do with
>ringing on those data bus lines that was compromised
>(and later alleviated) by critical path length.
>
>
>
>SYSTEM SPECIFICATIONS
>
>
>Case: Standard tower style; vented by two auxiliary fans plus power-supply exhaust
>fan.
> Front auxiliary fan is oriented as an intake fan; rear auxiliary fan is oriented
>as an exhaust fan.
>
>Power Supply: PC Power & Cooling Inc., ATX style 425-watt Turbo-Cool Deluxe, with
>integral exhaust fan.
>
>Motherboard: Abit model KV8-MAX3, with a VIA K8T800 + VT8237 integrated chipset.
> S/N label reads: "RD880414064004700 KV8 v1.0"
> Front and rear auxiliary fans powered from AUXFAN2 and AUXFAN1,
> respectively; auxiliary fan speeds cannot be controlled.
>
>CPU: AMD Athlon 64 Processor 3000+ currently running at about 2000 MHz.
>
>BIOS: Phoenix - AwardBIOS v6.00PG (K8T800-8237-6A7L0A19C-22), 06/29/2004.
> Voltages and fan speeds use factory settings. CPU frequency set to 200 (200/66/33)
>MHz. DRAM timing set by SPD.
>
>Socket DIMM2: 512MB DDR SDRAM Memory, Centon Electronics model PC3200 (400 MHz),
>p/n 512MBPC3200,
> date code = 0430. Other module board labeling: “IITG18TVC” and “PO#174585”.
>
>
>Socket AGP1: Video Controller
> Nvidia GeForce MX4000 64 Mb DDR P/N: 064-A8-NV93-LX S/N: 46123576544
>
>Socket PCI2: V.92 PCI 56K FaxModem
> US Robotics model 5610B S/N: 2MCCY81E0031 installed 17 January 2005
>Socket PCI3: PCI Parallel Port
> Intek21 model TK99
>02, p/n TK-P01E12 S/N: T02442600280 reinstalled 26 March 2005
>
>Disk I/O: Primary IDE master drive is Western Digital WD800JB-00ETA0, 80 Gb nominal;
> (logical drive C:, runs in Ultra-DMA mode).
>
> Primary IDE slave drive is Maxtor 90650U2, 6 Gb nominal;
> (logical drive D:, runs in Ultra-DMA mode).
>
> Secondary IDE master drive is CD R/W CDWriter IE5232
> (logical drive F:, runs in Ultra-DMA mode).
>
> Secondary IDE slave drive is Iomega Zip 100
> (logical drive E:, runs in PIO mode).
>
> Floppy drive (logical A:).
>
>Boot order: Floppy; CD; hard drive C:. Set up for dual-boot, default to C: (Windows
>2000).
>
>O/S: Operating system on C: is Windows 2000 version 5.00.2195 with SP 4 installed.
> Operating system on D: is Windows 98SE version 4.0.2222.
|
All messages in this thread [show all]
 |  | re: Question about 'Top reasons for random, fatal crashes in Windows XP and Windows 2000' (AManDotCom: Thu, Apr 21, 2005, 8:26 pm) |
| |
| |
Return to the Windows 2000 Discussion Forum
|
|
