re: front switch connections
Saturday, December 31, 2005 at 4:18 pm Windows 2000 Annoyances Discussion Forum
Posted by Redeyez
(4 messages posted)
Hi,
I solved this problem with the help of an observant friend.
Look at the pins and make sure you can see a 2 and a 8 on the same colum but several
rows away. this tells the order of the pins.
Now if you check between the ram slots and the heat sink you will find a table
which (if you have the exact same motherboard as me) will read
HDled +1 -3
PwRled +2 -4
Reset 5- 7+ ( not quite sure here just flip it until it works)
PwrOn +6 -8
this should be everything you need to set it up but double check the table on themotherboard
to make sure it's the same
On Friday, December 2, 2005 at 2:47 am, mike wrote:
>
>hi there i have the same in a dell tower done the bios in all still connected can
>i be of help mike
>
>
|
All messages in this thread [show all]
 |  |  |  |  | re: front switch connections (Redeyez: Sat, Dec 31, 2005, 4:18 pm) |
| |
| |
Return to the Windows 2000 Discussion Forum
|
|