re: File\ntkrnlmp.exe could not be loaded the error code is 16 Sunday, August 20, 2006 at 11:00 am Windows 2000 Annoyances Discussion Forum Posted by Xupa Krimminel (4 messages posted) Clearing BIOS worked for me. My error code was 16, but same file, ntkernlmp.exe I made two 2000 boot discs off images before I found this thread. Worked fine. On Saturday, August 30, 2003 at 1:50 pm, lidoroga wrote: >I just read this post (just saw it today) >If you haven't got it fixed yet, here's some things to check: > >1) Check CMOS settings. Set to factory and >redo from start if necessary. CMOS battery could >also be weak. > >2) Re-seat your RAM. >Low-grade budget RAM, or faulty RAM ? >can cause headaches; more so with two >CPUs (timing issues). >Try reading this article from > > Microsoft's Knowledge base > > > > Written in response to: re: File\ntkrnlmp.exe could not be loaded the error code is 16 (lidoroga: Saturday, August 30, 2003 at 1:50 pm) There are presently no replies to this message. All messages in this thread [show all] File\ntkrnlmp.exe could not be loaded the error code is 16 (tim gilliam: Mon, Aug 4, 2003, 6:55 pm) re: File\ntkrnlmp.exe could not be loaded the error code is 16 (MaddMaxx: Mon, Aug 4, 2003, 11:48 pm) re: File\ntkrnlmp.exe could not be loaded the error code is 16 (tim gilliam: Tue, Aug 5, 2003, 5:35 am) re: File\ntkrnlmp.exe could not be loaded the error code is 16 (MaddMaxx: Tue, Aug 5, 2003, 6:04 am) re: File\ntkrnlmp.exe could not be loaded the error code is 16 (marc voet: Thu, Aug 7, 2003, 5:26 am) re: File\ntkrnlmp.exe could not be loaded the error code is 16 (lidoroga: Sat, Aug 30, 2003, 1:50 pm) re: File\ntkrnlmp.exe could not be loaded the error code is 16 (Xupa Krimminel: Sun, Aug 20, 2006, 11:00 am) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 2000 Discussion Forum