re: Monitor will not stay on
Monday, November 20, 2006 at 12:46 pm
Windows 2000 Annoyances Discussion Forum
Posted by DEX
(11797 messages posted)
Are You A Wood Worker ? Click Here
Check for a mounting screw that may be taking the voltage to ground when the cover
is in place.
Put the cover on without any screws to start with and then add one at a time to find
the short.
High Voltage may be arcing over to the screw, take care.
Win2k Q and A Click Here
C. H. Forum Click Here
Repair Win2k Click Here
On Monday, November 20, 2006 at 10:58 am, MK wrote:
>My eMachines 17" will not stay on. When I push the on button (push in - on / push
>again - off) I hear a "click" and it goes off.
>
>Now, I removed the cover to look inside to see if there was anything that looked
>amiss. Nothing appeared to be wrong. Loose wire, bad smell, loose switch mount,
etc.
>I turned it on with the cover off. It stayed on. Safety ground, pinched circut?
I
>put the cover back on, it will not stay on.
>
>My smaller monitor an AOR works fine on the PC. Along with other monitors as well.
>Any ideas?
>
>eMachine 17"
>eView 17P
>
>Thanks!
- Written in response to:
- Monitor will not stay on (MK: Monday, November 20, 2006 at 10:58 am)
There are presently no replies to this message.
|
| 
