re: PC/Server Hang when cable connect to NIC. Wednesday, January 10, 2007 at 7:15 pm Windows 2000 Annoyances Discussion Forum Posted by hasry (12 messages posted) Steve, Its an internal connection. I've connected the cable and then boot the pc and its fire up normally. But I still can't use our LAN. I check the IP thru DOS (ipconfig) and there 's no IP and gateway ( i mean its 0.0.0.0) but there is ip for DNS. I've configure all the IP address, subnetmask and g/w thru network neighbourhood but still 0.0.0.0 when checking thru dos (ipconfig). I'm stuck here. On Tuesday, January 9, 2007 at 11:37 pm, hasry wrote: >I've this weird problem. I've reformat my server for office work use & use it for >few weeks now. But today, it hangs immediately when the network cable being inserted >to the NIC. When no cable connected, everything is fine. BTW, I've tried changing >the NIC, but the same thing happen. > >Acer Altos G310 >40GB HDD >128MB Memory >Win 2k SP4 > > Written in response to: PC/Server Hang when cable connect to NIC. (hasry: Tuesday, January 9, 2007 at 11:37 pm) There are presently no replies to this message. All messages in this thread [show all] PC/Server Hang when cable connect to NIC. (hasry: Tue, Jan 9, 2007, 11:37 pm) re: PC/Server Hang when cable connect to NIC. (Steve Dunn: Wed, Jan 10, 2007, 4:47 am) re: PC/Server Hang when cable connect to NIC. (hasry: Wed, Jan 10, 2007, 7:15 pm) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 2000 Discussion Forum