re: Folders write empty to DVD
Saturday, September 29, 2007 at 6:32 am
Windows 2000 Annoyances Discussion Forum
Posted by outofpocket
(210 messages posted)
Here are some things I would try (none of which could help).
- logs: the burner software might have a log of what it did, and I would review
that. Also look in the windows event log for problems relating to the burner or
disk, and make sure that the folder/files do not have an internal problem, such as
a failing CRC. I had a disk that had a bad spot that caused "silent" errors that
only showed up in the windows event log.
- look very carefully at the folder/file naming, for names that do not meet windows
naming specification, i.e., path name limits, excluded characters in the file name
- but work ok when you access the file - but do not work within the burner caching
process.
- visit the burner manfuacturer's web site to see if there's a forum that might discuss
your topic.
- isolate the exact failure. then copy that folder/subfolder to another area and
see if the copy works, and then try another burn.
Good luck and HTH -
Outofpocket
- Written in response to:
- Folders write empty to DVD (Hyuga: Friday, September 28, 2007 at 11:57 pm)
There are presently no replies to this message.
|
|
