re: preventing SYSTEMced error Thursday, January 10, 2008 at 3:26 pm Windows 2000 Annoyances Discussion Forum Posted by Steve Dunn (914 messages posted) If you are getting these registry hive errors despite clean installs it suggests you have a hardware problem. I'd download and run the drive manufacturer's diagnostic (they nearly all have one on their site) to see if anything wrong with the drive. If its ok, question - when you reinstall do you remove partition and start from scratch? Have you ever run chkdsk on your drive? It could also be other bad hardware - causing corruptions in the data when its being written back to the drive (might be worth running a memory checker, though they often don't find a problem if its not too bad - and as your machine obviously installs 2k, if it is memory, must be small fault. Last for now - you do always shutdown properly - no sudden poweroffs - because that can cause your symptoms. On Thursday, January 10, 2008 at 9:04 am, the ber wrote: >thanks, dex. it looks like a weekend project, but i've got to try something. i'll >post back when i have some results. > > > Written in response to: re: preventing SYSTEMced error (the ber: Thursday, January 10, 2008 at 9:04 am) Responses to this message: re: preventing SYSTEMced error (the ber: Friday, January 11, 2008 at 8:51 am) All messages in this thread [show all] preventing SYSTEMced error (the ber: Wed, Jan 9, 2008, 3:04 am) re: preventing SYSTEMced error (DEX: Wed, Jan 9, 2008, 1:46 pm) re: preventing SYSTEMced error (the ber: Thu, Jan 10, 2008, 9:04 am) re: preventing SYSTEMced error (Steve Dunn: Thu, Jan 10, 2008, 3:26 pm) re: preventing SYSTEMced error (the ber: Fri, Jan 11, 2008, 8:51 am) SOLVED for now: preventing SYSTEMced error (the ber: Fri, Jan 18, 2008, 10:36 pm) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 2000 Discussion Forum