re:No ICS, Router 192.168.0.1 conflict Thursday, April 23, 2009 at 6:11 pm Windows 2000 Annoyances Discussion Forum Posted by geek9pm (286 messages posted) "When Internet Connection Sharing is enabled, your LAN adapter will be set up to use IP address 192.168.0.1. Your computer may lose connectivity with other computers on your network. This a problem with Windows 2000. An you do not want to mess with the router, There is a practical solution. This subject has come up before. There is a software solution to this. I am a little slow, I will have to go search this forum for the information on how to do a "bridge" in Windows 2000. It is in here somewhere. "LAN bridge" is what I will look for. Geek9pm Written in response to: ICS not going through because LAN isn't connected? (Funky Monk: Wednesday, April 22, 2009 at 1:54 pm) Responses to this message: Using Ethernet Bridge 2.0 for Windows 2000 (geek9pm: Thursday, April 23, 2009 at 6:36 pm) All messages in this thread [show all] ICS not going through because LAN isn't connected? (Funky Monk: Wed, Apr 22, 2009, 1:54 pm) re:No ICS, Router 192.168.0.1 conflict (geek9pm: Thu, Apr 23, 2009, 6:11 pm) Using Ethernet Bridge 2.0 for Windows 2000 (geek9pm: Thu, Apr 23, 2009, 6:36 pm) re: Using Ethernet Bridge 2.0 for Windows 2000 (Funky Monk: Sat, Apr 25, 2009, 9:27 am) re: Using Ethernet Bridge 2.0 for Windows 2000 (geek9pm: Sat, Apr 25, 2009, 9:40 am) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 2000 Discussion Forum