I have a network with Win2000 and Win98 SE and use ICS. All work fine, but when the Win2000 machine is trying to connect i get 4 times the following error in the event viewer: IPNATHLP, "The Network Address Translator (NAT) was unable to request an operation of the kernel-mode translation module. This may indicate misconfiguration, insufficient resources, or an internal error. The data is the error code. " After this, Win2000 connects to my provider and both machines can connect the internet. So internet-connection is no problem, but it takes about 3 to 5 minutes until the connection is set up. Can anyone help me with this? thanks in advance, Alan.

[Reply or follow-up to this message]

is this a broadband connection? If so use a router.


On Saturday, July 13, 2002 at 9:21 am, Alan wrote:
>I have a network with Win2000 and Win98 SE and use ICS. All work fine, but when the
>Win2000 machine is trying to connect i get 4 times the following error in the event
>viewer: IPNATHLP, "The Network Address Translator (NAT) was unable to request an
>operation of the kernel-mode translation module. This may indicate misconfiguration,
>insufficient resources, or an internal error. The data is the error code. " After
>this, Win2000 connects to my provider and both machines can connect the internet.
>So internet-connection is no problem, but it takes about 3 to 5 minutes until the
>connection is set up. Can anyone help me with this? thanks in advance, Alan.

[Reply or follow-up to this message]

Yes, it is, i'm using an ADSL connection. But there 's got to be a way to solve this without spending more money on it. It worked before... but then again... it's MS...

[Reply or follow-up to this message]

Hello, I've got the same identical error code when I try to connect with ADSL. Did you solve this problem? How?


On Friday, July 19, 2002 at 11:37 am, Alan wrote:
>Yes, it is, i'm using an ADSL connection.
>But there 's got to be a way to solve this without spending more money on it. It
>worked before...
>but then again... it's MS...

[Reply or follow-up to this message]

Hi all, This is a Microsoft error (bugs bugs bugs !!!!). NAT Error and can be found at http://support.microsoft.com/default.aspx?scid=KB;EN-US;q293497& Lester.


On Thursday, September 5, 2002 at 2:22 am, Nicola wrote:
>Hello, I've got the same identical error code when I try to connect with ADSL. Did
>you solve this problem? How?
>
>

[Reply or follow-up to this message]

i have exactly the same error message. on a non networked computer dailing up to the internet on a 56k modem... i try to load certain websites, but my browser (ie6) closes before teh page finishs loading and leaves that error in my logs


On Friday, September 6, 2002 at 6:18 am, Lester Eliasquevitch wrote:
>Hi all,
>
> This is a Microsoft error (bugs bugs bugs !!!!).
> NAT Error and can be found at
>
>http://support.microsoft.com/default.aspx?scid=KB;EN-US;q293497&
>
>Lester.
>
>
>
>

[Reply or follow-up to this message]

KB293497 only applies if you are using Windows 2000 Server or Advanced Server. It is not possible to tweak the NAT service as described under Windows 2000/XP.


On Friday, September 6, 2002 at 6:18 am, Lester Eliasquevitch wrote:
>Hi all,
>
> This is a Microsoft error (bugs bugs bugs !!!!).
> NAT Error and can be found at
>
>http://support.microsoft.com/default.aspx?scid=KB;EN-US;q293497&
>
>Lester.
>
>
>
>

[Reply or follow-up to this message]

1.Open Your ICS Internet Protocol Properties 2.Click the Advance Button 3.Clear the checkbox Using Default Gateway ... ^_^"


On Saturday, December 20, 2003 at 6:39 pm, Steven wrote:
>
>KB293497 only applies if you are using Windows 2000 Server or Advanced Server. It
>is not possible to tweak the NAT service as described under Windows 2000/XP.
>

[Reply or follow-up to this message]

Can someone help me? Can't seem to find the ICS properties (I'm running Windows Server 2003, and a friend helped me set up ICS)... Err, I'm feeling dumb ^_^; ... Most I can do is modify my network connections, though there doesn't appear to be any ICS options in there.


On Saturday, January 3, 2004 at 8:46 am, leon wrote:
>1.Open Your ICS Internet Protocol Properties
>
>2.Click the Advance Button
>
>3.Clear the checkbox Using Default Gateway ...
>
>^_^"
>

[Reply or follow-up to this message]

• Search this forum
• Start a new thread on a different subject

• Report abuse of the forum