|
|
|
Question about 'Getting Internet Connection Sharing (ICS) to work with PPPoE'
Showing all messages in thread #1055682224
Windows 2000 Annoyances Discussion Forum
The following are all of the messages in this thread (4 in all), shown in chronological order. Click any message subject to view that message by itself or to view the thread hierarchy.
|
Question about 'Getting Internet Connection Sharing (ICS) to work with PPPoE'
Sunday, June 15, 2003 at 6:03 am
Posted by Alen Chen
(1 messages posted)
I have a question about Getting
Internet Connection Sharing (ICS) to work with PPPoE:
Hi There,
I got a serious problem for my two computers. first of all, I have one CUP 533,
64mb Ram, plus netgear pci FA311 network adapter (192.168.0.1 Subnet Mask 255.255.255.0)with
microsoft MN-510 wireless usb network adapter(192.168.1.101. Subnet Mask 255.255.255.0.
default gateway at 192.168.1.1) at one computer, and CUP 300, 64mb Ram, plus Netgear
PCI FA311 netwsork adapter (Auto IP settting) at the other one computer. The point
I could establish a Local LAN for these two computers, but no matter how hard I tried
I just can't activate "Internet Connection Sharing" function whatsoever. So please
gentlemen give me a help for someone who needed you hand. Thanks and have a good
day.
[Reply or follow-up to this message]
| |
re: Question about 'Getting Internet Connection Sharing (ICS) to work with PPPoE'
Sunday, June 15, 2003 at 7:38 pm
Posted by Robert
(5 messages posted)
To setup ICS, you need two NICs on ICS host. For more information, go to http://www25.brinkster.com/ChicagoTech
>setup ics.
Robert Lin, MS-MVP, MCSE and CNE
Windows & Network Support, Tips and FAQs on
http://www25.brinkster.com/ChicagoTech
On Sunday, June 15, 2003 at 6:03 am, Alen Chen wrote:
>I have a question about Getting
>Internet Connection Sharing (ICS) to work with PPPoE:
>
> Hi There,
>
> I got a serious problem for my two computers. first of all, I have one CUP 533,
>64mb Ram, plus netgear pci FA311 network adapter (192.168.0.1 Subnet Mask 255.255.255.0)with
>microsoft MN-510 wireless usb network adapter(192.168.1.101. Subnet Mask 255.255.255.0.
>default gateway at 192.168.1.1) at one computer, and CUP 300, 64mb Ram, plus Netgear
>PCI FA311 netwsork adapter (Auto IP settting) at the other one computer. The point
>I could establish a Local LAN for these two computers, but no matter how hard I
tried
>I just can't activate "Internet Connection Sharing" function whatsoever. So please
>gentlemen give me a help for someone who needed you hand. Thanks and have a good
>day.
[Reply or follow-up to this message]
|
re: Question about 'Getting Internet Connection Sharing (ICS) to work with PPPoE'
Monday, November 7, 2005 at 10:39 pm
Posted by minou302
(1 messages posted)
The biggest problem with the MN-501 is that the genius jerks at Microsoft are the
ONLY HARDWARE MANUFACTURER on the planet that do not provide driver downloads from
their website. The driver is not located at Windows Update. It is IMPOSSIBLE to
find driver for the MN-501, rendering it useless if you lose the CD.
[Reply or follow-up to this message]
|
re: Question about 'Getting Internet Connection Sharing (ICS) to work with PPPoE'
Sunday, December 4, 2005 at 1:29 pm
Posted by Dave
(1 messages posted)
I have the driver you need on cd if you still need them but not sure how to send
it to you I'll check back at this site in a few days to see if you have any suggestions
On Monday, November 7, 2005 at 10:39 pm, minou302 wrote:
>The biggest problem with the MN-501 is that the genius jerks at Microsoft are the
>ONLY HARDWARE MANUFACTURER on the planet that do not provide driver downloads from
>their website. The driver is not located at Windows Update. It is IMPOSSIBLE to
>find driver for the MN-501, rendering it useless if you lose the CD.
[Reply or follow-up to this message]
| |
Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread
| |
Return to the Windows 2000 Discussion Forum
|
|
|
|
