Hi everyone...
                     i just read the artical belong to change the boot & startup 
logos....but i did'nt find the artical about to change to boot & startup screens 
using windows 2000.......so I decide to tell you all that how to change the boot 
& startup screen using windows 2000........
                     Why post a follow-up article on changing the Win2K boot logo? 
There are several reasons, with the primary being a result of Service Pack 2. When 
SP2 was released some changes were made that affected the way Windows File Protection 
behaved. The registry changes outlined in our earlier article, that would disable 
Windows File Protection, no longer work after applying Service Pack 2. This follow-up 
article will address this minor obstacle, and pose a much easier and safer way to 
change the Win2K Boot Logo whether you're running SP1 or SP2. 

                     The Tools And The Overview 
The only tools you are going to need to get the job done is Resource Hacker,, you 
can download this software from ( http://www.users.on.net/johnson/resourcehacker/ 
) and some kind of image editing tool such as PhotoShop (not free) or Irfanview (free) 

Sometimes it's easier to understand what you're doing after you've seen the "big 
picture". When Windows 2000 boots, a bitmap image is displayed, this image is stored 
in a file called NTOSKRNL.EXE which is typically found here: C:\WINNT\SYSTEM32\NTOSKRNL.EXE. 
Notice I said typcially? When you install Windows 2000 it will ask you which drive 
and which directory you would like to install - for the duration of this article 
we are going to assume you chose the default options and installed Win2K onto your 
C: drive into the default directory \WINNT. Back to the "big picture", the following 
is a broad overview of the steps we'll be preforming in this article: 
Make a copy of NTOSKRNL.EXE named KERNEL01.EXE 
Creating a .BMP file that is 640x480 with 16 colors 
Use Resource Hacker to import the modified bitmap image into KERNEL01.EXE 
Modify the BOOT.INI file, adding an option to choose KERNEL01.EXE instead of NTOSKRNL.EXE 

                      Baby Steps 
We've looked at the "big picture", now it's time to outline those steps in detail. 
It might look like a lot of work, but it should only take you about 5 or 10 minutes 
on your first attempt. 
Step 1. 
Make a copy of C:\WINNT\SYSTEM32\NTOSKRNL.EXE called KERNEL01.EXE and place it in 
the C:\WINNT\SYSTEM32\ folder. 


Step 2. 
Download and unzip Resource Hacker. Once it is unzipped, launch "ResHacker.exe". 


Step 3. 
Click "File", then "Open", and browse to the C:\WinNT\System32\ directory. Open the 
file we just created in the first step called KERNEL01.EXE 


Step 4. 




On the left-hand side of the screen, double-click on the word "Bitmap" and then the 
number "1". Click the icon that reads "1033" and you should see the Windows 2000 
boot logo on the right side of the screen. The "Holy Grail" if you will. At this 
point, you can minimize Resource Hacker while we prepare our new image. 


Step 5. 
Using any image editor, create a Bitmap image that is 640 x 480 using 16 colors. 
We've found the easiest way to create an image is to take a copy the current image 
and open it with Photoshop and then edit the top portion. Set the "mode" to "indexed 
colors" and set the number of colors to 16. Save the file as a BMP file with RLE 
Compression enabled and you're all set. 


Step 6. 
Once you have created the image, save it somewhere on your drive taking note of its 
location. 


Step 7. 
From within Resource Hacker, click on "Action", then "Replace Bitmap" and a new window 
will pop-up at this point. Then click on the "Open file with new bitmap" button and 
browse to the 16-color image you just created. It should look similar to the picture 
on the right. 


Step 8. 
Once you have selected the file, click on the "Replace" button and you should return 
to the "root" of Resource Hacker. Just for the hell of it, make sure your change 
took effect. It should now look something like this: 


Step 9. Once everything looks good, click "File" then "Save". 


Step 10. 
Time for a quick recap of what we've done so far. We've made a copy of our NTOSKRNL.EXE 
file and placed it in the C:\WINNT\SYSTEM32\ folder. The copy was named KERNEL01.EXE 
and was opened using Resource Hacker. The bitmap resource image for the boot logo 
was replaced with our own customized version, and the file was saved. 



Step 11. 
Conceptually, the next step is to "tell Win2K to use the new KERNEL01.EXE file when 
it boots, instead of it's normal NTOSKRNL.EXE file". We are going to do this by modifying 
the BOOT.INI file which is located in the root of your C: drive. The file is marked 
hidden and read-only by default so the first thing we should do is turn off the read-only 
attribute. Do this by right clicking on the boot.ini file and then clicking on properties. 
Uncheck the read-only box and click OK to apply changes. 


NOTE: 
if you cannot find your boot.ini file, you probably have Windows Explorer setup so 
that it cannot view hidden files. Correct this by clicking on Tools and then Folder 
Options. Go to the View Tab and toggle the radio button to Show Hidden Files and 
Folders.


Step - 12. 
We're now ready to open the BOOT.INI file and modify its contents. I've listed below 
what my current BOOT.INI file looked like before any changes were made to it. Yours 
should be somewhat similar.


 [boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect 



The line we're concerned with is the one under [operating systems] - this is the 
line that NTLDR parses to determine the location of the operating system boot partition. 
Make a copy of this line and paste is below the existing one. You should also take 
a minute and make sure the timeout=X line under the [boot loader] section has a value 
other than zero. This is the number of seconds that the boot menu will be displayed, 
before it accepts the default value and continues. The default value will be whatever 
is listed first under the [operating system] section. 



[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect 



Modify the line directly below the [operating systems] heading, adding the following 
switch to the end: /KERNEL=KERNEL01.EXE (KERNEL01.EXE is the name of the file we 
modified in the previous steps) By doing this, we are telling NTLDR that we want 
to boot our system using the specified Kernel file, instead of the default NTOSKRNL 
file that is used when the /kernel= option does not exist. You should also change 
the description on this line from "Microsoft Windows 2000 Professional" to something 
like "Microsoft Windows 2000 Hacked Logo" so you know which option is which. Your 
boot.ini file should now look like this: 



[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft  Windows 2000 Hacked Logo" /fastdetect 
/kernel=kernel01.exe
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect 
 




Before we save this file and move to the dreaded Step 13, let's recap what we've 
done here just to make sure everything is right. We've opened up the boot.ini in 
edit mode (with read-only turned off) and have made the following changes: the timeout 
value is greater than zero, the default operating system line was copied and modified 
to include the /kernel switch pointing to the modified file from the previous steps. 
The original default operating system line was not changed in any way, it was just 
"bumped down" a spot to make room for our new kernel file. 




Step 13. There really isn't much to Step 13, just reboot your system. You should 
be prompted with a menu for a period of 3 seconds asking you which boot option you 
would like: "The Hacked Logo" or the "Professional Boring" version. It should default 
to "The Hacked Logo" version after those 3 seconds have expired, since it resides 
at the top of the list. However should something go amuck and you've totally screwed 
up your "Hacked Logo" kernel file by using a 16-bit color bitmap image, instead of 
a 16 color image, you can still boot your system up using the original kernel file 
by choosing the second option on the menu. That's why is was so important to not 
make any changes to that line - it's your software version of an "Oh Shit" handle. 


hopefully you are grasped what I have done here.........

Muzaffar Ahmad Tahir

muzaffar_ch@msn.com

[Reply or follow-up to this message]

I happened upon another web page while looking up how to change my startup screens. 
Your article information:

http://www.littlewhitedog.com/content-9.html

Copyright © by LWD All Right Reserved.

Published on: 2004-01-23

Thank you for the info, though.

[Reply or follow-up to this message]

Everybody would love to make lots of money quickly, working from home, and only doing a few hours of work per week. I've spent the past two years trying to find a great way of doing this. Only over the course of the past few months have I found any "get rich quick" programs worth buying. I've been trying to make money online for a long time. I had a few small websites, but they never made much more than a few hundred per month. It was easy money and didn't require much work on my part, but I knew there were people out there doing better than I was and I knew I could do as well as them. Now, I've seen a lot of "get rich quick" programs. Most of these people make claims about earning $2000/day with Google or something similarly insane. Almost all of these people are complete liars. Even if they were making $2000/day with Google AdSense, it'd be because they had high- traffic websites with a lot of quality content. I'd know, because in one whole month, I never even made half of what they promised I'd make daily with their programs. Maybe you've already been scammed by one of these fraudsters. Anyway, I finally got sick of what was being offered. I decided I'd look through the all of the "get rich quick" programs I could find and see if there were any that were actually legitimate. I found that there were owners selling their programs for well over $100, but the information in them could be found almost anywhere online for free. Additionally, they all contained out-of-date information, had no e-mail support, no money back guarantees, and broken links in the downloads section. In conclusion, almost all of the programs I found were completely useless. The owners knew it, but they couldn't care less about their customers since they didn't offer refund policies! Amazingly, while looking through all of the programs, I actually did find a few legitimate programs. They were run by ordinary people like you and me, and they had found some great methods of making money from their home by doing very little work. I spent some time working with those programs, and my income is now ten times what it used to be. These programs provided a large amount of great information on how to make extra money on your computer doing very little work. Numerous customers had provided great feedback and reviews for their products. Many of them have started to make money just days after buying! Their programs have excellent prices, and the authors have a group of paid staff who are dedicating to helping you or providing assistance if you need any. I must say I was amazed! If you do decide to purchase any of the programs listed below, I recommend you join quickly. Most of the owners tell me they are getting an overwhelming number of sales and plan on raising prices in the near future, so order while prices are still low! To Your Online Success, www.jobinfosys.com

[Reply or follow-up to this message]

• Search this forum
• Start a new thread on a different subject

• Report abuse of the forum