re: Stop Error 0x0000009c need help
Monday, March 5, 2007 at 9:54 pm
Windows Server 2003 Annoyances Discussion Forum
Posted by Cheeseman
(279 messages posted)
0x0000009C: MACHINE_CHECK_EXCEPTION
(Click to consult the online MSDN
article.)
This is a hardware issue: an unrecoverable hardware error has occurred. The parameters
have different meanings depending on what type of CPU you have but, while diagnostic,
rarely lead to a clear solution. Most commonly it results from overheating, from
failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware
beyond its capabilities (e.g., overclocking a CPU).
From here.
I would start by running diags. If you notice the issue remains, make sure that the
system is up to date. After that I would start taking the system down to a min to
POST configuration swapping parts to validate them.
On Friday, March 2, 2007 at 11:12 am, Andrew Alsoszatai-Petheo wrote:
>I received the following stop error on an HP DL360 G3: Blue Screen Trap (BugCheck,
>STOP: 0x0000009C (0x00000000, 0x808A07A0, 0xBE000300, 0x1008081F))
>
>Looking into the event viewer I noticed that there was an error around the same
exact
>time of the stop error. This was a 6008 Event ID. I have researched this problem
>and found that it is probably hardware related. I am not entirely sure what is going
>on with this. Anyone have a clue?
>
> I tried the Dump Diag and it did not tell me anything. I heard there was a tool
>available to plug in the parameters of the stop error to find out more detail.
- Written in response to:
- Stop Error 0x0000009c need help (Andrew Alsoszatai-Petheo: Friday, March 2, 2007 at 11:12 am)
There are presently no replies to this message.
|
|
All messages in this thread [show all]
 |  | re: Stop Error 0x0000009c need help (Cheeseman: Mon, Mar 5, 2007, 9:54 pm) |
|
