|
|
|
re: Win95 and USB
Wednesday, July 3, 2002 at 12:45 pm
Windows 95 Annoyances Discussion Forum
Posted by fast turtle
(2 messages posted)
Nice to findout that all I need is the hardware USD Drivers. Makes life much easier
with 95c
On Wednesday, August 15, 2001 at 3:57 am, LLayr wrote:
>
>Win 95 osr1 does not support usb, but all of the other versions do. if you have
the
>oem cd of win95b osr2 or the upgrade its on the cd in the /other/usb dir just click
>setup
>problems: usb is an enhancement to low level services and microsux disn't EVER get
>it quite right, so even though the new usb standard is so much faster ms has deliberately
>excluded it from xp and the other 3 new versions of windows. besides B>G> has recently
>invested in hardware of the non usb type. don't despair! you have to start with
a
>clean version of win 95 no other software or updates allowed then put in USBSUP.EXE
>then mb/oem drivers then regular drivers then windows patches and upgrades then
etc
>if you have more than 1 usb port you can hotswap but if you have more than 1 usb
>bus you need to reinstall the drivers for the usb hardware and disable them off
the
>other then it works fine
>i wuz all over the net 4 months lookin 4 info on this, denada,... i figed it out
>the hard way it sounds hard but it is easy i have 3 built in usb buses and one add
>on bus 4 a total of 8 ports and they all work fine, ive fixed like 25 systems with
>the same problem :)
>good luck!
>-ta
>
- Written in response to:
- re: Win95 and USB (LLayr: Wednesday, August 15, 2001 at 3:57 am)
There are presently no replies to this message.
|
|
All messages in this thread [show all]
 |  |  | re: Win95 and USB (fast turtle: Wed, Jul 3, 2002, 12:45 pm) |
| |
| |
Return to the Windows 95 Discussion Forum
|
|
|
|
