|
|
|
re: ooops, format problem
Thursday, August 16, 2001 at 11:50 am
Windows 95 Annoyances Discussion Forum
Posted by RandyM
(71 messages posted)
Have you tried leaving your system (boot) disk in the drive and then rebooting?
It should start.If your computer does not even see the "A" drive (when booting
does the light on the drive go on?) then go into your BIOS and check your boot sequence.
Floppy first then the Hard drive. If you can access the floppy, but can not boot
from it, it mean that the disk is no good for bootiing. Borrow one from a friend. Next
time you reformat try the followiing command format c: /s This command
formats the "C" drive and puts the necessary system fles on it so you may boot to
the "C" and not need the "A". Good luck Randy
- Written in response to:
- ooops, format problem (richard: Thursday, August 16, 2001 at 8:51 am)
There are presently no replies to this message.
|
|
All messages in this thread [show all]
 |  | re: ooops, format problem (RandyM: Thu, Aug 16, 2001, 11:50 am) |
| |
| |
Return to the Windows 95 Discussion Forum
|
|
|
|
