|
|
|
Question about 'Resolving Hardware Conflicts'
Sunday, October 7, 2001 at 7:56 pm
Windows 98 Annoyances Discussion Forum
Posted by John
(3 messages posted)
I have a question about Resolving
Hardware Conflicts:
I have a bootup problem that I believe is due to a video card I installed. I either
get a black or scrambled screen. I hit Ctrl,Alt, Delete 4 to 10 times and it boots
correctly and there are no problems...only when I start the PC. If I start the PC
fairly quickly after shutting down it boots fine. I have disabled the cirrus logic
video that came with the PC. I heard that the video card should be in a certain PCI
slot...first, last....I don't really know. Could this be the problem? I have updated
drivers installed. I know that it is sharing the same IRQ (10) with other hardware
but I was told that this was not a conflict...maybe someone else knows better. Is
there another IRQ someone would recommend?
Thanks
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 Aztech Sound Galaxy Washington 16
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 MPU-401 Compatible
10 NVIDIA Vanta
10 Efficient Networks 3060 SpeedStream PPP Adapter
10 IRQ Holder for PCI Steering
10 IRQ Holder for PCI Steering
11 Aztech Sound Galaxy Washington 16
12 PS/2 Compatible Mouse Port
13 Numeric data processor
14 Standard Bus Mastering IDE Hard Disk Controller
15 Standard Bus Mastering IDE Hard Disk Controller
|
Responses to this message:
|
|
All messages in this thread [show all]
 | Question about 'Resolving Hardware Conflicts' (John: Sun, Oct 7, 2001, 7:56 pm) |
| |
| |
Return to the Windows 98 Discussion Forum
|
|
|
|
