|
|
|
re: System crashes if not connected to Internet
Friday, May 3, 2002 at 1:36 am
Windows 98 Annoyances Discussion Forum
Posted by Tim
(8 messages posted)
Thanks for that - there's definitely no RJ-45s in the back.
I'll let you know how I go...
Thanks again
On Friday, May 3, 2002 at 12:58 am, amaralliya e. thenardier wrote:
>well, "HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter" appears to be a network card.
>you can check the back of the machine to be sure... look for an rj-45 jack (looks
>like a rather large phone jack). seeing as you don't use it, you might want to look
>into disabling it. if the card is part of the motherboard, you may be able to do
>so via the bios setup. if not, you should be able to disable it via the device manager.
>this might also solve other problems, such as extended boot time (though that can
>be solved other ways).
>
>anyway, if you don't use the vpn stuff and the network card you could probably pare
>the list down to this:
>
>Client for Microsoft Networks
>Microsoft Family Logon
>Dial-Up Adapter
>TCP/IP -> Dial-Up Adapter
>
>if you don't use the family logon (when windows loads it presents a list of users
>at logon time), you can also remove "Microsoft Family Logon" and set the primary
>network logon to windows logon (network applet, right below the network
>components list).
|
All messages in this thread [show all]
 | | | | | |  | re: System crashes if not connected to Internet (Tim: Fri, May 3, 2002, 1:36 am) |
| |
| |
Return to the Windows 98 Discussion Forum
|
|
|
|
