|
|
|
re: Question about 'Connect to a Windows XP or 2000 system with a Windows 95, 98, or Me system over a Network'
Tuesday, August 13, 2002 at 3:19 pm Windows 98 Annoyances Discussion Forum
Posted by Everett
(2940 messages posted)
Andre: MS has removed support for the NetBEUI protocol from XP.
it is best if all of your computers have the exact same list of network protocols;
this means that a mixed 98/XP network should have the NetBEUI protocol removed from
the 98 computers.
you can rely on TCP/IP for your network, but if you wish, add the NWLink IPX/SPX
protocol to all of your computers by viewing the network properties on each computer;
click Add or Install, select Protocols, select NWLink IPX/SPX.
your configuration will have file sharing blocked by design by the XP computer for
security reasons;
if you know that your network internet connections have adequate firewall protection;
you can try to disable the ICF in XP.
it is essential that you have a firewall of some type in place.
for a DSL connection with multiple IP addresses and a router; configure packet filtering
in your router.
block TCP/UDP ports 137-139 and 445.
your ISP will help you do this.
for a cable connection with multiple IP addresses and no hardware firewall device
in place; you will be unable to share files on your LAN.
On Monday, August 12, 2002 at 10:49 am, André wrote:
>I have a question about Connect
>to a Windows XP or 2000 system with a Windows 95, 98, or Me system over a Network:
>
>I have 2 computers configured in a network.
>The network does the job very wel cofigured as :
>Computer 1
>OS = Windows 98 Se
>With a router-gatewy DLINK-701
>software for the DLINK insalled on this computer.
>
>Computer 2
>OS = Windows XP Home edition
>
>and a hub of course
>
>With this configuration
> 1- internet sharing is O.K = 1 IPadress (same)
> 2- Network between the 2 computers is O.K.
>
>But... as I would like to test some programs via internet connection I am paying
>now my provider for 2 IPadresses
>
>I changed my configuration as :
>Computer 1
>OS = Windows 98 Se
>DLINK-701 hardware and software removed
>
>Computer 2
>OS = Windows XP Home edition
>and a hub
>
>With these configuration=
>
>1- internet connection is OK on both computers with a different IPadress.
>2- netwerk dont work at all.
>
>My provider told me to configure the LAN network with NetBeui or IPX/SPX.
>
>But : How do I configure WINXP in NetBeui or IPX/SPX ???
>I cannot find these protocols in WINXP
>
>My goal is to have the 2 computers in a network and to access the internet from
each
>computer with a different IPadress.
>with or without the router-gateway DLINK-701.
>somebody can help ?
>Thanks for the answer
>André
>on7gq@pandora.be
>
>
>
>
>
>
>
>
>
|
All messages in this thread [show all]
 |  | re: Question about 'Connect to a Windows XP or 2000 system with a Windows 95, 98, or Me system over a Network' (Everett: Tue, Aug 13, 2002, 3:19 pm) |
| |
| |
Return to the Windows 98 Discussion Forum
|
|
|
|