|
|
|
re: Question about 'Resolving Hardware Conflicts'
Thursday, October 24, 2002 at 1:31 pm
Windows 98 Annoyances Discussion Forum
Posted by rebootbill
(764 messages posted)
remove them both, reboot and see if it picks up 1 or 2 of them. if it picks up 1,
great, if picks up none or 2 reinstall the mobo chipset.
On Thursday, October 24, 2002 at 11:10 am, ann s mina wrote:
>I have a question about Resolving
>Hardware Conflicts:
>
>
>My device manager is showing a yellow "!" next to the direct memory access controller.
> BUT... I have TWO direct memory access controllers, and the other one is working
>fine. The one that has the "!" shows a conflict in the resources tab as follows:
>
>Direct Memory Access 04 used by:
> Direct memory access controller
>Input/Output Range 0000 - 000F used by:
> Direct memory access controller
>Input/Output Range 0080 - 0090 used by:
> Direct memory access controller
>Input/Output Range 0080 - 0090 used by:
> Direct memory access controller
>Input/Output Range 00C0 - 00DE used by:
> Direct memory access controller
>
>When i try to remove the one with the yellow "!" the computer restarts and tells
>me its "found new hardware" then tries to reinstall and the yellow "!" comes back.
>
>Do i need two? how can i get rid of the "broken" one permanently? BTW this question
>was posed in the Windows 98 discussion forum with no responses. Thought I'd try
>here. thank you very much.
|
All messages in this thread [show all]
 |  | re: Question about 'Resolving Hardware Conflicts' (rebootbill: Thu, Oct 24, 2002, 1:31 pm) |
| |
| |
Return to the Windows 98 Discussion Forum
|
|
|
|
