re: Trying to Locate CeQuadrat software.
Wednesday, December 18, 2002 at 4:33 pm
Windows 98 Annoyances Discussion Forum
Posted by Tom
(1 messages posted)
I have a Compaq 7470...the same thing happend to me, here is how I got mine back
(Direct e-mail from Compaq) 3 different choices
If the Just! Burn software is missing then you can selectively restore
just burn from the QuickRestore CD or from the D drive System Save
partition on your system. To perform a selective restore from the
QuickRestore CD, follow these steps:
1. Place the QuickRestore CD into the CD-ROM drive.
2. Using Windows Explorer, navigate to the QuickRestore CD's directory.
3. Open the CPQS directory, and then open the QUICKSR directory.
4. Double-click the Qrestore file.
5. Wait until the QuickRestore menu is displayed, and then click
Selective.
6. Select the application or driver from the menu that follows.
To selectively restore just burn from the D drive System Save partition,
follow these steps:
1. Double-click the "Presario Support" icon on your system desktop.
2. Double-click the QuickRestore icon and select the "SelectiveRestore"
option.
3. From the list of programs, select the application or driver you wish
to install.
4. After installation if you are prompted to restart the system, do so.
Else restart the system.
After the computer restarts, just burner software would be installed in
your computer.
If you don't find the Just burn Icon in the Selective Restore option
then please follow the procedure below:
1. Put CD #1 in the CD-ROM Drive
2. Open Windows Explorer
3. Open E:\CPQDRV folder
4. Transfer the "151580" folder from E:\CPQDRV to D:\CPQDRV
5. Also transfer the "ICON" folder from E:\CPQDRV to D:\CPQDRV
6. The option to restore Just Burn Should be in Compaq Support under
Selective restore
Also, you can perform a typical restore of the Just! Burn software using
the following steps:
1. Start, Run and type C:\CPQS\QUICKSR\QRIA.EXE 151580-00D-001
2. Now press Enter key on the keyboard.
This will start installing the software in the computer.
On Saturday, November 2, 2002 at 11:15 am, Rob Caplis wrote:
>Hi everyone,
>
>Recently, I had to reinstall my Quick Restore software on my Compaq 5700T. This
>software was supposed to clear my hard drive and return it to factory installation.
>
>
>Unfortunately, it cleared all of my drivers and my CD-burning software (CeQuadrat
>just burn), which came with the computer. I found the drivers, but is there anyway
>to find Cequadrat? I called Compaq and they never heard of the software.
>
>Thanks!
|
All messages in this thread [show all]
 |  | re: Trying to Locate CeQuadrat software. (Tom: Wed, Dec 18, 2002, 4:33 pm) |
| |
| |
Return to the Windows 98 Discussion Forum
|
|
