Annoyances.org - re: IRQ assignments (Windows 98 Discussion Forum)


Home » Windows 98 Discussion Forum » Message 1043583259	Search \| Help \| Home

re: IRQ assignments
Sunday, January 26, 2003 at 4:14 am
Windows 98 Annoyances Discussion Forum
Posted by lynn (11 messages posted)

what do you do when the acpi irq steering is in conflict and there is no indecation of this happenig i am running a shuttel space walker ak31 and this is on going i have even updated the bios but this not only affects the internal usb port but the parall port as well i kow this only when i can print out then i run nuts and bolts i breifly read some about this is in the bios set up

On Tuesday, January 21, 2003 at 12:44 pm, Everett wrote:

>Dave:  if your PC cards are not detected or don't work correctly with the Windows 
>98 PCMCIA drivers, you can work around the problem by reserving IRQ 10 and the memory 
>range C000-CBFF. 
>to do so, follow these steps: 
>
>click Start, Settings, Control Panel, and double-click System. 
>click Device Manager, Computer, Properties. 
>click Reserve Resources, Interrupt Request (IRQ), then Add. 
>type 10 and click OK. 
>click Memory, then Add. 
>reserve the memory range C000-CBFF and click OK. click OK again and restart your 
>computer
>






Written in response to:
re: IRQ assignments  (Everett: Tuesday, January 21, 2003 at 12:44 pm)


Responses to this message:
re: IRQ assignments  (Everett: Sunday, January 26, 2003 at 2:58 pm)