re: how to enable usb ports Sunday, June 15, 2003 at 7:44 pm Windows 98 Annoyances Discussion Forum Posted by Sonny (8 messages posted) Dorothy some of the operating systems will automatically detect and install your web camera, but others will not. For example, Windows XP will probably detect and install, but Windows98 may not. Also you need to check in your CMOS for the USB ports and see if they are enabled. Depending upon the computer, when you bootup and hear the beep, press the escape key to go to the CMOS. On one of the menus you should find settings for your USB ports. Good Luck Sonny On Sunday, June 15, 2003 at 12:45 pm, dorothy wrote: >sonny here all i know.i have a hp/64mb/56kmodem/internet explorer 6.0sp1.that about >all i know.trying to hook up web cam.the down load was sucessfull.tried all the things >the fix glossery said.when i try to use it.is say computer can not detect the camera.the >only thing in the glossery i cant figure out.it says to check to see if usb port >is enabled.thank you have a nice fathers day. > > Written in response to: re: how to enable usb ports (dot: Sunday, June 15, 2003 at 12:45 pm) Responses to this message: re: how to enable usb ports (dot: Monday, June 16, 2003 at 6:30 am) All messages in this thread [show all] how to enable usb ports (dorothy: Sat, Jun 14, 2003, 8:11 pm) re: how to enable usb ports (Sonny: Sat, Jun 14, 2003, 8:39 pm) re: how to enable usb ports (dot: Sun, Jun 15, 2003, 12:45 pm) re: how to enable usb ports (Sonny: Sun, Jun 15, 2003, 7:44 pm) re: how to enable usb ports (dot: Mon, Jun 16, 2003, 6:30 am) re: how to enable usb ports (dot: Sun, Jun 15, 2003, 12:55 pm) re: how to enable usb ports (JmC: Sun, Jun 15, 2003, 4:39 pm) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 98 Discussion Forum