is this you?!
Thursday, June 26, 2003 at 2:53 pm Windows 98 Annoyances Discussion Forum
Posted by Lynne
(1 messages posted)
I came across this quite by accident. Is this the wonderful Alistair Beaton I know
of old via London Management?!
Do tell!
L
x
On Monday, July 1, 2002 at 3:43 am, Alistair Beaton wrote:
>I have the same problem as P McDougall. In my case it appears to be a fairly recent
>development. I have a DVD Rom drive which was designated 'E' and a CD re-writer
designated
>'F', which I use for backups. I also have a Lexar multi-media USB reader which I
>leave permanently connected. This used the drive letters 'G' and 'H' for Smart Media
>and Compact Flash cards. Now the Lexar reader grabs 'E' and 'F' on booting. I have
>tried all the solutions suggested on the Annoyances website, using Device Manager
>and regedit. 'Config.sys' and 'autoexec.bat' are disabled on startup - they contain
>nothing relevant anyway. When the card reader is disconnected the DVD and CD R/W
>drive letters are as required but as soon as I plug in the card reader the next
bootup
>switches the drive letters again. I have tried removing the Lexar drivers before
>re-designating the drive letters then re-installing the Lexar. I found and installed
>a newer Lexar driver without any improvement.
>
|
All messages in this thread [show all]
 |  |  |  | is this you?! (Lynne: Thu, Jun 26, 2003, 2:53 pm) |
| |
| |
Return to the Windows 98 Discussion Forum
|
|