re: black screen on boot and vertical lines
Wednesday, September 8, 2004 at 11:27 am
Windows 98 Annoyances Discussion Forum
Posted by ghjd
(2 messages posted)
i got the comp 2 boot up into normal mode but there r still lines on it. i rightclicked,
went 2 properties, settings, advanced, performance and set the bar to none. the lines
are still there the lines are abit fainter. there is a thin rectangle box on the
right hand side of the mouse. the rectangle is bout 3X as big as the cursor.
On Tuesday, September 7, 2004 at 2:30 pm, DEX wrote:
>ghjd
>Try this .Long shot
>reboot into safemode/right click on the desktop/select Prop./Setting Folder/Advanced
>Button/Monitor Setting/check to see if it's set at 60 hertz if not set it for 60
>and then reboot and give it a try
>Like I said Long Shot.
>But you said it works ok in safemode, that may be because the video driver is not
>driving the monitor at 256 with a high hertz setting and safemode should 16
>anyway try it. can't hurt. just don't go higher with setting
>If not replace the monitor with a good used one.
>Or replace the video card, if it's not a onboard MB type.
>
>
>
|
All messages in this thread [show all]
 | |  | re: black screen on boot and vertical lines (ghjd: Wed, Sep 8, 2004, 11:27 am) |
| |
| |
| |
Return to the Windows 98 Discussion Forum
|
|
