re: PRI Slave Drive ATAPI Incompatible
Tuesday, March 7, 2006 at 9:49 am
Windows 98 Annoyances Discussion Forum
Posted by mojoe
(1327 messages posted)
Hi,
You probably have your CD-rom/Cd-RW drive attached as a slave device on the Primary
IDE channel. You could try deleting the CD-rom in Device Manager and reboot to see
if Windows redetects it and reinstalls the atapi drivers for it. Better yet, if you
don't have any devices attached to the Secondary ide chan you could attach the cd-rom
as a Master device to it instead. (Change the master/slave strap options on the back
of the cd drive first.) That would allow the hard drv to run at its optimal speed
also.
hth
mj
|
