|
|
|
re: "M:\ is not accessible. The device is not ready"
Monday, December 4, 2006 at 10:51 am
Windows 98 Annoyances Discussion Forum
Posted by Linda
(2 messages posted)
Thanks, guys for the valuable informtion.
On Thursday, November 30, 2006 at 10:38 pm, gewg_ wrote:
>was: ADAPTEC DirectCD
>
>|I get this message when I try to play a CD
>| Linda
>
>Your description is very sketchy.
>
>It could be that the thing worked at one time
>and it has increasingly given problems--eventually not working at all.
>In that case, get a lens cleaner and use it.
>If the drive is very old, the laser LED could be degraded past reliability
>and you need to replace the drive.
>
>It could be that the thing worked at one time and suddenly didn't.
>In that case, it could be a corrupt device driver,
>meaning that the old driver should be removed and a replacement installed.
>
>It could be that the drive is brand new and you have never seen it work.
>In that case, it needs to be connected with a power cable and a signal cable,
>jumpered properly, and needs a device driver installed.
|
All messages in this thread [show all]
 | |  | re: "M:\ is not accessible. The device is not ready" (Linda: Mon, Dec 4, 2006, 10:51 am) |
| |
| |
Return to the Windows 98 Discussion Forum
|
|
|
|
