Hi Emma.






On Thursday, November 1, 2007 at 12:35 pm, Emma wrote:
|How do I delete Win 98 CD from my computer

I don't know what you mean, its a CD you don't delete it. If your talking about wiping 
the hard drive clean and doing a fresh install of Win98 then that slightly different.

You will need a Bootdisk. Make sure the BIOS 
is setup to read the floppy drive first in the boot sequence. Make sure that Format.com 
and Fdisk.exe are on the boot disk.

Start your computer up with the boot disk inserted. If you only have one hard drive 
with no partitions then that drive will be C: and your CD Rom will be D:. At the 
A:\ prompt type in D: and enter if the CD Rom drivers are working then the 
prompt should go to D:\. With the Win98 CD in the drive just type Dir to see if you 
can see the files on the root of the CD.

Go back to the floppy drive type A: and enter. Then type Format C: 
and confirm Y to erase the drive. Depending on how big the drive is it could 
take a few minutes. I have a 20Gb HD and it takes 15-20 minutes to format.

After the format is complete you can label the drive, normally I just type in Hard 
drive. When it formats it checks the drive for back sectors, you should see the 
final report when it finished.

Now type in D: (CD Rom drive letter) and enter then just type in Setup 
and enter. Just follow all the prompts to install Win98. 

• Reply or follow-up to this message

• Search this forum
• Start a new thread on a different subject

• Report abuse of the forum