Annoyances.org
Home » Windows 98 Discussion Forum » Message 1206155770 Search | Help | Home
  
re: modem/DUN? inoperative
Friday, March 21, 2008 at 8:16 pm
Windows 98 Annoyances Discussion Forum
Posted by john (15 messages posted)


Thank you both. I will try the suggested steps and, if unsuccessful, will call it a day and look for a decent PCMCIA. You mention an independent DSP?? that could be attached to the serial port (9 pin?) at the back. Could you fill me in on this, as such a connection would be more suitable for me than the PC card on the side.


On Wednesday, March 19, 2008 at 7:12 pm, ancien wrote:
>Thanks for your reply. It helps. C K makes good points also, especially since the
>modem was working and appeared to fail.
>
>The original modem is a 28.8 right? Is it worth resurrecting? You could use an external
>with an independent DSP thru the serial port and get better performance. It would
>take some of the load off the Pentium II 166 CPU.
>
>Win98 has built in drivers for VoiceView type modems 9600, 14400, 19200, 28800. You
>could try a fresh manual install, as an added modem, checking the do not detect box,
>and choosing your modem from the list. That might resolve the driver question raised
>by C K.
>
>Sometimes software just seems to get stuck or confused. VoiceView modems have a voice
>mode and a data mode. A list of commands supported will be in the registry from the
>original install at
>
>HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Modem
>
>Highlight the key for the internal modem, probably 0001, in the left pane and there
>will be information about the modem in the right pane, including the .inf file name.
>
>Below each key are subkeys. The Init subkey gives the initialization string that
>is being sent to the modem each time you make a connection. Other subkeys are AT
>commands. You can use Win98 utility HyperTerminal to send commands directly to the
>modem and see if it responds, or add a command to the Extra Settings area of the
>Advanced Connection Settings dialog box to force data mode after initialization,
>for example.
>
>
>
>


Written in response to:
re: modem/DUN? inoperative (ancien: Wednesday, March 19, 2008 at 8:12 pm)

Responses to this message:
*re: modem/DUN? inoperative (ancien: Saturday, March 22, 2008 at 2:32 am)

All messages in this thread [show all]
-modem/DUN? inoperative (john: Tue, Mar 18, 2008, 5:29 pm)
-re: modem/DUN? inoperative (ancien: Wed, Mar 19, 2008, 11:07 am)
-re: modem/DUN? inoperative (john: Wed, Mar 19, 2008, 11:17 am)
*re: modem/DUN? inoperative (C K: Wed, Mar 19, 2008, 12:12 pm)
-re: modem/DUN? inoperative (ancien: Wed, Mar 19, 2008, 8:12 pm)
-re: modem/DUN? inoperative (john: Fri, Mar 21, 2008, 8:16 pm)
*re: modem/DUN? inoperative (ancien: Sat, Mar 22, 2008, 2:32 am)
Return to the Windows 98 Discussion Forum

All content at Annoyances.org is Copyright © 1995-2008 Creative Elementtm All rights reserved.
Please do not plagiarize; redistributing these pages without permission is strictly prohibited.