re: Plug n Play won't detect hardware info Thursday, September 17, 2009 at 1:54 am Windows 98 Annoyances Discussion Forum Posted by Neal Dodd (7 messages posted) Yes, I adjusted the MaxPhysPage filesize some time ago when I built my machine. Actually 98se worked fine with 2 Gig but wouldn't boot into Safe Mode, as I felt it was too useful to lose I had to remove the 1 Gig chip to be fully functional. I bought 2x 1 Gig chips with Linux in mind. I gave you the specs thinking of your remark on suitable distros. Anyway the good news: Flash Card Reader problem resolved! I tried Nathan's drivers and nothing happened when I clicked 'instal' so then tried Maximus Decim's Native drivers current version 3.3 and IT WORKS!! No fuss, simple, quick, as we say over here in the UK "it does exactly what it says on the tin!". Complete with a neat little 'safely remove' icon in the systray and an uninstal utility (like you need one??) it's brilliant! There are some very clever guys out there that put manufacturers to shame and the support you give is amazing to us novices; so to Gewg and all of you, THANKS! :) On Wednesday, September 16, 2009 at 10:44 am, gewg_ wrote: >Neal Dodd wrote: >|Wow what a wealth of information on Linux... thanks Gewg! >| >No sweat. Pass on a good deed; it'll get back to me. > >|[...]1Gig memory; did have 2 but Windoze 98se didn't like that >|so had to take one out. >| >512MB is the usual limit--depends on your BIOS. Did you try the old trick? >http://google.com/search?q=site:annoyances.org+MaxPhysPage+AXCEL216 >http://google.com/search?q=site:annoyances.org+MaxPhysPage Written in response to: re: Plug n Play won't detect hardware info (gewg_: Wednesday, September 16, 2009 at 10:44 am) There are presently no replies to this message. All messages in this thread [show all] Plug n Play won't detect hardware info (Neal Dodd: Mon, Sep 14, 2009, 2:37 am) re: Plug n Play won't detect hardware info (gewg_: Mon, Sep 14, 2009, 11:30 am) re: Plug n Play won't detect hardware info (Neal Dodd: Tue, Sep 15, 2009, 1:03 am) re: Plug n Play won't detect hardware info (gewg_: Tue, Sep 15, 2009, 12:26 pm) re: Plug n Play won't detect hardware info (Neal Dodd: Wed, Sep 16, 2009, 7:07 am) re: Plug n Play won't detect hardware info (gewg_: Wed, Sep 16, 2009, 10:44 am) re: Plug n Play won't detect hardware info (Neal Dodd: Thu, Sep 17, 2009, 1:54 am) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 98 Discussion Forum