re: Windows 98SE does not fully load
Thursday, June 7, 2001 at 10:07 pm
Windows 98 Annoyances Discussion Forum
Posted by Curt R
(1315 messages posted)
One of the options that comes up with the Safe Mode boot menu is a 'line by line
confirm' option wherein you can confirm each item before windows attempts to load
it. This is very handy for finding out what device(s) isn't/aren't loading properly
on bootup and a little simpler method than what you're recommending.
NOTE: you
can get into that menu by holding the control key down during bootup
On Thu, 7 Jun, 2001 - 13:08, Roman C. Schaefer wrote:
>something that is loading is causing a conflict.
>Once you get into safe mode, go to start, run and type in MSCONFIG. In the first
>tab ( General) go to the " Selective Startup " and click on that radio button to
>highlight it. Then uncheck all of the items below it. Now choose APPLY and then
OK
>and reboot. At this point you should be able to boot into Windows. Now go back and
>( ONE AT A TIME ) recheck the each of the items that you unchecked. Then reboot
after
>each has been rechecked. At some point, you will again run into the same error you
>were having. When the error does occurr, go to that folder Listed on a tab to the
>right of General and use the same process of unchecking and rebooting and then rechecking
>and rebooting. Don't do this ( Checking and unchecking process with Win.ini or System.ini.
>It is a long drawn out process.
>
>On Thu, 7 Jun, 2001 - 10:46, John wrote:
>
>>
>>When I turn on my PC, Windows loads half way through and then restarts. After it
>>starts reloading it comes up with the safe mode option because windows failed to
>>load on the previous attempt. I have posted this problem before with no responses
>>and have also seen other postings with no answers to this issue. Could someone
please
>>help us with this WINDOWS 98 ANNOYANCE? Thanks.
>>
|
All messages in this thread [show all]
 | |  | re: Windows 98SE does not fully load (Curt R: Thu, Jun 7, 2001, 10:07 pm) |
|
