|
|
|
Question about 'Do I still need CONFIG.SYS and AUTOEXEC.BAT?'
Showing all messages in thread #1002738253
Windows 98 Annoyances Discussion Forum
The following are all of the messages in this thread (8 in all), shown in chronological order. Click any message subject to view that message by itself or to view the thread hierarchy.
|
Question about 'Do I still need CONFIG.SYS and AUTOEXEC.BAT?'
Wednesday, October 10, 2001 at 11:24 am
Posted by Rick Singleton
(1 messages posted)
I have a question about Do
I still need CONFIG.SYS and AUTOEXEC.BAT?:
Well, I have an older compaq computer with a 32X CDROM. It just so happens that
the drivers are not located in windows(95/98/ME/Windows2000). Thus, if I remove
the config.sys and the autoexec.bat, the CDROM becomes a ghost! Compaq does not support
any drivers other then the one I was able to locate for DOS. With the driver defined
in the config.sys and autoexec.bat files, win-95 and win-98 will see the CDROM.
Since ME and Windows2000 do not use the files I have not been able to update this
(Still very functional) processor, since multiple boots are required on installation,
and windows drivers do not exist.
[Reply or follow-up to this message]
|
re: Question about 'Do I still need CONFIG.SYS and AUTOEXEC.BAT?'
Saturday, October 20, 2001 at 7:15 pm
Posted by carl
(316 messages posted)
Can email the brand and model # of the cdrom
carlmc@mail.com
On Wednesday, October 10, 2001 at 11:24 am, Rick Singleton wrote:
>I have a question about Do
>I still need CONFIG.SYS and AUTOEXEC.BAT?:
>
>
>Well, I have an older compaq computer with a 32X CDROM. It just so happens that
>the drivers are not located in windows(95/98/ME/Windows2000). Thus, if I remove
>the config.sys and the autoexec.bat, the CDROM becomes a ghost! Compaq does not
support
>any drivers other then the one I was able to locate for DOS. With the driver defined
>in the config.sys and autoexec.bat files, win-95 and win-98 will see the CDROM.
>Since ME and Windows2000 do not use the files I have not been able to update this
>(Still very functional) processor, since multiple boots are required on installation,
>and windows drivers do not exist.
[Reply or follow-up to this message]
|
re: Question about 'Do I still need CONFIG.SYS ?'
Wednesday, March 12, 2003 at 7:58 am
Posted by Diana Conner
(1 messages posted)
I have a question about a message every time I start windows98 at home, it reads:
can't import c:\moo.reg
Unhandled exception c0000005 at address: 100016b8
I get dos option to scandisk.... How do I fix it?
[Reply or follow-up to this message]
|
re: Question about 'Do I still need CONFIG.SYS ?'
Sunday, April 20, 2003 at 5:54 am
Posted by Rob
(1 messages posted)
This is a virus.
For info; http://www.bullguard.com/virus/87.aspx
On Wednesday, March 12, 2003 at 7:58 am, Diana Conner wrote:
>I have a question about a message every time I start windows98 at home, it reads:
>
>can't import c:\moo.reg
>
>Unhandled exception c0000005 at address: 100016b8
>
>I get dos option to scandisk.... How do I fix it?
[Reply or follow-up to this message]
|
re: Question about 'Do I still need CONFIG.SYS ?'
Friday, June 27, 2003 at 9:08 am
Posted by allen
(1 messages posted)
it's a kwbot virus from kazaa. you'll need to run regedit and delete the moo.txt
files from your computer. there are also files that are recreated on the kazaa my
shared folder that needs to be deleted. they are approximately 19kb. delete em all
On Sunday, April 20, 2003 at 5:54 am, Rob wrote:
>This is a virus.
>
>For info; http://www.bullguard.com/virus/87.aspx
>
>
[Reply or follow-up to this message]
|
re: Question about 'Do I still need CONFIG.SYS and AUTOEXEC.BAT?'
Tuesday, August 12, 2003 at 8:46 am
Posted by Angelina
(1 messages posted)
moo.reg is a virus that comes with certain shareware versions of Kazza. Follow instructions
below to
eradicate -
Whats moo.reg -
moo.reg is a file the C based program mentioned above creates that will start up
when u retsrat etc.. and holds some important but realy unnescicary stuff. It is
unnessisary because it is alredy written to the disk correctly.
How to get rid of it
THIS MAY BE EASYER IN SAFE MODE TO DO THIS RESTART AND PRESS F8 RAPIDLY AND SLECT
SAFE MODE YOU CANNOT ACESS THE INTERNET IN SAFE MODE SO PRINT THIS OUT BEFORE.
1. You'll probaly know the file that it comes from so go to C:\Program Files\KaZaA\My
SHared Folder and back up all the files u want but not the infecded 1. (C:\Program
Files\KaZaA is the defalt folder for kazaa u may have installed it else where)
2.Uninstall KaZaA
3.now restart
4.if that didnt work then try and click this link (don't bother link broken) and
download KaZaA light it is a program without the adware and stuff download norton
anti virus if you dont have a cd and then install it when its done restart and it
should find an virus thats the moo.reg one follow the on screen instructions and
poof its gone!
Good Luck!
On Wednesday, October 10, 2001 at 11:24 am, Rick Singleton wrote:
>I have a question about Do
>I still need CONFIG.SYS and AUTOEXEC.BAT?:
>
>
>Well, I have an older compaq computer with a 32X CDROM. It just so happens that
>the drivers are not located in windows(95/98/ME/Windows2000). Thus, if I remove
>the config.sys and the autoexec.bat, the CDROM becomes a ghost! Compaq does not
support
>any drivers other then the one I was able to locate for DOS. With the driver defined
>in the config.sys and autoexec.bat files, win-95 and win-98 will see the CDROM.
>Since ME and Windows2000 do not use the files I have not been able to update this
>(Still very functional) processor, since multiple boots are required on installation,
>and windows drivers do not exist.
[Reply or follow-up to this message]
|
re: Question about 'Do I still need CONFIG.SYS ?'
Thursday, October 9, 2003 at 7:10 pm
Posted by scott
(1 messages posted)
I don't know what causes this error message but I am running ME and one day out of
nowhere I got it and it comes up every time now. I am searching the web for references.
I will get back to you if I find anything.
Scott
On Wednesday, March 12, 2003 at 7:58 am, Diana Conner wrote:
>I have a question about a message every time I start windows98 at home, it reads:
>
>can't import c:\moo.reg
>
>Unhandled exception c0000005 at address: 100016b8
>
>I get dos option to scandisk.... How do I fix it?
[Reply or follow-up to this message]
|
re: Question about 'Do I still need CONFIG.SYS and AUTOEXEC.BAT?'
Saturday, December 13, 2003 at 11:39 pm
Posted by Mihai Panait
(1 messages posted)
Can you send me attached the config.sys and autoexec.bat? I have a Compaq Presario
and I can't reinstall Win 98 because those files are missing!
Thank you very much for your prompt answer.
Best regards,
Mihai
On Wednesday, October 10, 2001 at 11:24 am, Rick Singleton wrote:
>I have a question about Do
>I still need CONFIG.SYS and AUTOEXEC.BAT?:
>
>
>Well, I have an older compaq computer with a 32X CDROM. It just so happens that
>the drivers are not located in windows(95/98/ME/Windows2000). Thus, if I remove
>the config.sys and the autoexec.bat, the CDROM becomes a ghost! Compaq does not
support
>any drivers other then the one I was able to locate for DOS. With the driver defined
>in the config.sys and autoexec.bat files, win-95 and win-98 will see the CDROM.
>Since ME and Windows2000 do not use the files I have not been able to update this
>(Still very functional) processor, since multiple boots are required on installation,
>and windows drivers do not exist.
[Reply or follow-up to this message]
| |
Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread
| |
Return to the Windows 98 Discussion Forum
|
|
|
|
