|
|
|
re: Question about 'What do I do with ''unknown'' devices in Device Manager?'
Tuesday, August 20, 2002 at 6:24 am
Posted by Mike
(2 messages posted)
I read that this can be generated when WIndows is connected to a device that is not
'plug & play' compatible.
But I have this message too in the I/O list device mngr doesn't report any unknown
devices...? hmmm?
So how can an unknown device be recognized as such in the I/O list and not in device
mngr?
On Saturday, June 15, 2002 at 7:15 am, Juergen wrote:
>I have a question about What
>do I do with "unknown" devices in Device Manager?:
>Win98SE: What do I do if there is ONLY a "in use by unknown device"-entry in the
>I/O-settings, which are not editable. (Devicemanager-Computer-Properties=> 4 radiobuttons,
>IRQ, I/O, DMA, Memory).
>Juergen
[Reply or follow-up to this message]
|
re: Question about 'What do I do with ''unknown'' devices in Device Manager?'
Tuesday, December 17, 2002 at 2:38 am
Posted by Jim
(1 messages posted)
I found After loading MS Fax Svc, that it took over my modem, I had to Ctrl, Alt,
Del, and "end task" FAx Svc.
to capture my modem so I could access the internet.
(each time I turned on my computer)! THis may be the same routine but w/other devices.
On Tuesday, August 20, 2002 at 6:24 am, Mike wrote:
>I read that this can be generated when WIndows is connected to a device that is
not
>'plug & play' compatible.
>But I have this message too in the I/O list device mngr doesn't report any unknown
>devices...? hmmm?
>So how can an unknown device be recognized as such in the I/O list and not in device
>mngr?
>
>
>
[Reply or follow-up to this message]
|
re: Question about 'What do I do with ''unknown'' devices in Device Manager?'
Saturday, September 6, 2003 at 4:18 pm
Posted by aljernon805
(86 messages posted)
i not familiar with ms fax svc, but i installed third party fax device which i can
access via program menus. however, the program also started every time i turned
on the machine or restarted. two possible sollutions: in the program it self i told
it not to load at start up. also, look in the start menu to see if you can remove
from there. another possible solution is to use a program like started to control
which programs load at start up.
[Reply or follow-up to this message]
| |
| |
Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread
| |
Return to the Windows 98 Discussion Forum
|
|
|
|
