Tip: Run a free scan for common Windows errors ad

re: Trying to Locate CeQuadrat software. Saturday, November 2, 2002 at 11:27 am Posted by alpha (71 messages posted) Google knew. http://www.cequadrat.com/ [Reply or follow-up to this message] re: Trying to Locate CeQuadrat software. Saturday, November 2, 2002 at 12:53 pm Posted by Rob Caplis (3 messages posted) Thanks... Does anyone recommend any particular burner software for Windows 98 SE? [Reply or follow-up to this message] re: burner software... Saturday, November 2, 2002 at 1:01 pm Posted by GM (40 messages posted) Roxio EX CD Creator Link to Roxio EZ CD Creator [Reply or follow-up to this message] re: Trying to Locate CeQuadrat software. Wednesday, December 18, 2002 at 4:33 pm Posted by Tom (1 messages posted) I have a Compaq 7470...the same thing happend to me, here is how I got mine back (Direct e-mail from Compaq) 3 different choices If the Just! Burn software is missing then you can selectively restore just burn from the QuickRestore CD or from the D drive System Save partition on your system. To perform a selective restore from the QuickRestore CD, follow these steps: 1. Place the QuickRestore CD into the CD-ROM drive. 2. Using Windows Explorer, navigate to the QuickRestore CD's directory. 3. Open the CPQS directory, and then open the QUICKSR directory. 4. Double-click the Qrestore file. 5. Wait until the QuickRestore menu is displayed, and then click Selective. 6. Select the application or driver from the menu that follows. To selectively restore just burn from the D drive System Save partition, follow these steps: 1. Double-click the "Presario Support" icon on your system desktop. 2. Double-click the QuickRestore icon and select the "SelectiveRestore" option. 3. From the list of programs, select the application or driver you wish to install. 4. After installation if you are prompted to restart the system, do so. Else restart the system. After the computer restarts, just burner software would be installed in your computer. If you don't find the Just burn Icon in the Selective Restore option then please follow the procedure below: 1. Put CD #1 in the CD-ROM Drive 2. Open Windows Explorer 3. Open E:\CPQDRV folder 4. Transfer the "151580" folder from E:\CPQDRV to D:\CPQDRV 5. Also transfer the "ICON" folder from E:\CPQDRV to D:\CPQDRV 6. The option to restore Just Burn Should be in Compaq Support under Selective restore Also, you can perform a typical restore of the Just! Burn software using the following steps: 1. Start, Run and type C:\CPQS\QUICKSR\QRIA.EXE 151580-00D-001 2. Now press Enter key on the keyboard. This will start installing the software in the computer. On Saturday, November 2, 2002 at 11:15 am, Rob Caplis wrote: >Hi everyone, > >Recently, I had to reinstall my Quick Restore software on my Compaq 5700T. This >software was supposed to clear my hard drive and return it to factory installation. > > >Unfortunately, it cleared all of my drivers and my CD-burning software (CeQuadrat >just burn), which came with the computer. I found the drivers, but is there anyway >to find Cequadrat? I called Compaq and they never heard of the software. > >Thanks! [Reply or follow-up to this message] re: Trying to Locate CeQuadrat software. Wednesday, January 1, 2003 at 5:40 pm Posted by Jan (1 messages posted) I, too, used my Quick Restore softward on my Compaq only to have the same problem - lost drivers and no JustBurn! I contacted HP Compaq and was given a solution which did not work and advised I could purchase software. Instead, I followed suggestion posted by Tom on 12/18/02: Start,Run and type C:\CPQS\QUICKSR\QRIA.EXE 151580-00D-001. It worked like a charm. On Saturday, November 2, 2002 at 11:15 am, Rob Caplis wrote: >Hi everyone, > >Recently, I had to reinstall my Quick Restore software on my Compaq 5700T. This >software was supposed to clear my hard drive and return it to factory installation. > > >Unfortunately, it cleared all of my drivers and my CD-burning software (CeQuadrat >just burn), which came with the computer. I found the drivers, but is there anyway >to find Cequadrat? I called Compaq and they never heard of the software. > >Thanks! [Reply or follow-up to this message] re: Trying to Locate CeQuadrat software. Thursday, January 2, 2003 at 4:01 pm Posted by Rob Caplis (3 messages posted) Happy New Year, Everyone! I tried the steps that Tom and Jan reccommended and it worked. Most of the drivers and preripheral software that was included was still unlocked within the D drive. After unziping them, I was able to get my software. Now to go make that Bowie mix... Rob On Wednesday, January 1, 2003 at 5:40 pm, Jan wrote: >I, too, used my Quick Restore softward on my Compaq only to have the same problem >- lost drivers and no JustBurn! I contacted HP Compaq and was given a solution which >did not work and advised I could purchase software. Instead, I followed suggestion >posted by Tom on 12/18/02: Start,Run and type C:\CPQS\QUICKSR\QRIA.EXE 151580-00D-001. > It worked like a charm. > > [Reply or follow-up to this message] Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 98 Discussion Forum