re: Windows ME Fixes...
Thursday, December 18, 2003 at 8:46 am
Windows Me Annoyances Discussion Forum
Posted by jabuck
(2274 messages posted)
Love the add-ons Jack, very up to date---again, a masterpiece. ---jabuck
On Thursday, December 18, 2003 at 3:08 am, Jack Gulley wrote:
>It is time for an update to my old version of
>target="_break"> Windows ME Fixes so.....
>
>
> 
>By:
>
>
> Actually,
>Windows ME is very stable (well can be)
>if you remove a few default software modules from memory, clean up your disk drive,
>remove any/all
>Spyware_AD-ware, browser hijackers, virus, worms and trojans, then update
>all device drivers, install all Windows Updates and make sure your hardware
>is OK.
>
>Memory hardware problems: 
>
>First make sure your system memory (RAM) is OK.
> For example: memory failures can cause random program hanging symptoms. Or if
>you are overclocking and there is a random failure problem. This can be happening
>without you realizing it on most system boards running Windows. So you must test
>memory outside of Windows. Memory problems can also result in program files on the
>disk being corrupted during a Defrag. A common memory problem from tweaking your
>system is a BIOS setting of "CLK SDRAM Cycle Length" of CL=2 when you may have a
>CL=3 rated SDRAM module added to the machine. Use the CMOS Setup function to set
>memory values to default or standard settings, and the CL setting to 3 (unless you
>know for a fact your memory is rated CL=2). Setting the memory DRAM Timings to "Turbo"
>or "Fast" instead of the "Normal" setting can also cause problems.
> Run a standalone memory test from a DOS boot diskette. Get both
>target="_blank"> DocMemory_v2.0 and
>target="_blank"> MemTest86_v3.0, and make their boot
>diskettes. You should be able to run both for at least 12 hours without errors
>to test your hardware, before you suspect Windows ME is the cause of problems.
>
> name="512 MB Limits" >
> If a Windows
>ME system has more than 512MB of RAM, then to work around a
>bug in the vcache management, per
>target="_blank">MS_253912, you must add the following
>to the [vcache] section of C:\Windows\SYSTEM.INI file:
>
>[vcache]
>MaxFileCache=524288
>
>If more than 1024MB (1GB) RAM, then a second entry in SYSTEM.INI may
>be required in the [386Enh] section per
>target="_blank">MS_304943 to limit Windows ME to
using
>just 1GB of physical RAM:
>
>[386Enh]
>MaxPhysPage=40000
>
>See
>Memory Resources and
> Memory Management_vcache
for
>additional information.
>
>
> name="Standard Intro" >
>Slowdown and hang problems: 
> Standard
>approach to this type of problem is to clean up the disk drive, run a full up to
>date virus scan, check for and remove Spyware - Ad-ware
>- Browser Hijackers, update Windows ME with security fixes, and then
remove
>some unnecessary programs.
>
> SCANDISK >
> First, run
ScanDisk
>to make sure the drive is OK. If problems running ScanDisk, then reboot the system
>into SAFE MODE (hold Ctrl when rebooting, before the Windows splash
>screen) and run Scandisk. In some cases it may be necessary to boot from a Windows
>ME boot diskette and run from the DOS prompt: SCANDISK C: to clear
>errors.
>
> Disk CleanUp >
> To do a quick Disk
>CleanUp and clean out temp files that you do not need, run (Start - Programs
-
>Accessories - System Tools -Disk CleanUp) on your C: drive. Run this
every
>week to keep system clean. The first time you run it, select the "Downloaded Program
>Files" line, click View button, and manually removed all "objects" shown, in case
>one of these plug-ins are back level and causing problems. They will download again
>if required.
>
> name="Spywareinfo" >
> Information on
>target="_blank"> Spyware and Browser Hijack removal
>tools, prevention tools, links and forums can be found at
>target="_blank"> SpywareInfo. You can get help identifying
>new hijackers, related programs and current news.
>
> CWShredder>
> A major
>problem today is new and rapid changing Browser Hijackers. Check for and remove
the
>newest of these with the CoolWeb Browser Hijack removal tool. Downloaded and then
>OPEN the program
>CWshredder.exe . In some cases Browser Hijackers will prevent you from accessing
>this download site and other SpywareInfo sites. In that case you can use any working
>computer to download the small
>CWshredder.exe program to a diskette and then run it from the diskette on the
>infected system. Close all other Internet Explorer windows and then run it. When
>done, reboot your system and run it again.
>
> Spyware - SpyBot >
> Next, and
>most important step, is to download and install the
>target="_blank">SpyBot Search_&_Destroy
>tool to delete any Spyware/AD-ware/hijacker found. Read about this type of junk
at
>Spyware_etc.
>These programs come hidden in "free" software, like KaZaA, and can corrupt or slow
>down your system. Or can be installed by some hijack web sites that hijack your
browser
>settings. After installing SpyBot, use the ONLINE feature to update
>the software and its reference lists, then run a scan and delete any checked
items
>found. Leave the un-checked items alone for now. Advanced users can do additional
>cookie, history list and Registry deleting with
>target="_blank">SpyBot later by using the
un-checked
>items.
>
> Ad-Aware - Lavasoft >
> Another good
>free and easy to use Spyware-Adware remover is
>color=#2200FF>Lavasoft's_Ad-Aware. It finds and removes a large number
>of ADWare programs and Porn Dialers. Purchase version includes real-time detecting
>and blocking of Spyware-Adware. Download the free version at
>target="_blank"> Ad-Aware_6 to scan for and remove
>Spyware-Adware. Be sure to check for updates before using. The first time you run
>it, you should select the Custom mode and enable all checks that you can. If any
>items are found, check them to remove them and be sure to reboot the system afterwords.
>
> name="Virus Scan" >
> If you
>do not have a good up to date virus scan utility installed or there
>are problems with it, do a free online AV scan at
>target="_blank"> HouseCall_AV by TrendMicro.
>This will take a while to run but worth it to know that you do not have a virus
or
>common Trojan. If any are found and not removed, go to either
>target="_blank"> PC-cillin or
>target="_blank"> Symantec Removal Tools or
>target="_blank"> McAfee_AV sites for information
on
>the specific virus and removal tools and instructions. If HouseCall does not download
>and run, try getting the Klez removal tool at
>target="_blank"> Symantec Removal Tools and make sure this virus is not on the
>system. Or try the
>color=#111188> Panda On-Line virus scan.
>
> name="DoxDisk" >
>A quick check for Internet Explorer browser HiJack'ers can be done at
>target="_blank"> DoxDesk.com web site. If any are detected, then Ad-Aware or
>SpyBot should be used to remove them.
>
> name="WINTOP tool" >
> To understand
>what tasks and programs are running on your machine, may be causing problems and
>taking up the processor bandwidth, download
>target="_blank"> WinTop, one of the free Micro$oft Kernel Toys. It gives accurate
>%CPU usage by program. You can also use the Windows ME System Tools - System
>Information utility, expand "Software Environment" and look at the "Running
Tasks"
>and the "Loaded Modules", to find all programs running and all programs, DLLs and
>Drivers loaded into memory.
>
> Program Close Sound >
> To help
>make yourself aware of background processes ending or aborting, go to Control Panel
>- Sounds and Multimedia Properties - Sounds tab and select the "Program Close"
>event and enable one of the program close sounds, and Apply it. Now every time a
>program closes or aborts you will hear the sound, and alert you to possible problems
>you were not aware of.
>
>There is also a recommended update (patch) on the
>target="_blank">Windows UpDate for the Internet
>Explorer navigation sound (click) that is needed to avoid random hangs when using
>IE.
>
> name="PCHealth - TaskMonitor" >
>
 To make
>Windows ME stable and allow ScanDisk and Defrag to run without restarts,
it
>is important to remove two Windows ME Startup tasks that often cause performance
>problems, hangs and restarts of ScanDisk and Defrag. Use (Start - RUN - msconfig
>- OK, Startup tab) to un-check and remove PCHealth and TaskMonitor
>from your Windows ME startup list. They are not needed and if their data files are
>corrupted, they can slow down your system. PCHealth collects system configuration
>changes for use in remote problem analysis by Enterprise Network $upport desks.
>size="-2">Are you paying for that kind of online support? TaskMonitor collects
>information on what parts of programs are being loaded and Tune-UP uses it to tell
>Defrag which 10 programs to leave fragmented. Drives are fast and
>you do not need this minor tweak for loading a select few programs, one time.
>Un-check the "show message box" when the system boots. Once this is done, reboot
>and go to System Tools - Scheduled Tasks and delete the icons for
PCHealth
>and Tune-UP applications, the second part of these programs, again unneeded.
>Defrag will now run a little faster.
>
> >Be aware that if you have a software FireWall, that it logs hits to a log file,
>and will be doing writes to the disk drive. This may cause ScanDisk and Defrag to
>restart. To get around this problem you either have to disable the firewall logging,
>disable the firewall during scans, unplug the internet connection, or do the scans
>in Safe Mode.
>
> name="LexMark Drivers" >
> The LexMark
>Z, A & P series printer drivers cause random program and shutdown hangs.
>If not sharing Lexmark printer to the network, one of it's problem drivers can be
>removed without effecting normal operation. Rename or delete the file \Windows\System\Lexpps.exe
>using Safe Mode or a boot diskette DOS prompt. The file, Lexpps.exe, may
also
>exist with some low end HP and Compaq printers that were OEM'ed by Lexmark, so search
>for it and rename. See
>target="_blank"> AnswersThatWork - Lexpps.exe. Reboot
>and test. In addition, for most LexMark printers, like the Z42, you can also remove
>Lexstart.exe from the Startup tab list with RUN - MSCONFIG utility, (keep
>LexmarkPrintTray). Test to see that removing it does not cause printer problems
with
>your model, other than slowing down initial printing of the first page.
>
> name="System _RESTORE" >
> If your System
>_RESTORE files are corrupted, contain a virus or have grown too large, it can cause
>system slowdown problems. Often the STMGR.exe task will start running at 50% or
more
>in the background. This can be corrected by
>target="_blank"> Disabling System Restore and
then
>re-enabling System Restore, to delete all the old restore points. Go to (Start
>- Settings - Control Panel - System - Performance tab - File System - Troubleshooting
>tab), and check the box for "Disable System Restore", click Apply
and
>exit. System will reboot. Allow STMGR time to delete all the old system restore
files,
>wait for no disk activity for at least a minute. Then run DEFRAG on the drive. Next
>go back into the Troubleshooting tab and un-check the box to enable System
>Restore again. Then use the Hard Disk tab to set the "System Restore disk space
>use:" slide bar to only use about 1000MB (or less) of disk space to limit how
>much of the drive it might use. Then change the "Typical role of this computer:"
>to the Network Server option for better performance. - - Also, make sure
system
>is up to date on the
>color=#0000BB>Windows UpDate site, as there is a year old fix
for
>System Restore not working correctly.
>
> name="Automatic Updates" >
> If system slowdowns only start
after
>logging on to the Internet, then disable Automatic Windows and IE updates.
>Again, if their files are corrupted it can cause system slowdowns, hangs, or the
>mouse to freeze for 3 seconds every five minutes. Go to Control Panel - Automatic
>Updates and under Options, set "Turn off automatic updating. I will update
>my computer manually." Check this every so often as Windows will turn it back on
>sometimes. Then in Internet Explorer, click Tools - Internet Options line - Advanced
>tab, and un-check the box "Automatically Check for IE updates" and then click
>Apply.
> Next go to Control
>Panel - Add/Remove Programs and look for "Critical Update Notification".
If
>found, Remove it. See
>target="_blank"> AnswersThatWork - WUCrtUpd.exe.
It
>can cause your system to check the Windows Update site every five minutes when online.
>Then use the
>color=#0000BB>Windows UpDate site to update manually. On the Windows
>Update site, there is an update for the Automatic Update program. Make sure you
install
>this update, and then go back to the Control Panel and Turn off automatic updating
>again. Trying to do automatic updates in the background can kill Dialup performance,
>so you have to disable automatic updates in both places.
>
> NetCrawl >
> Slow system
performance
>just after booting up and/or just after connecting to the Internet or a Network
can
>be caused by the default setting for NetCrawl. NetCrawl is a Windows ME feature
>that searches for Network Shares of servers and printers. See
>target="_blank"> MS_Q256248 . If not connected to
>a network or if you never connect to a network server or printer, this function
can
>be disabled. See
>target="_blank"> MS_276322 or in "My Network Place",
>Tools, Folder Options, View tab, un-check the "Automatically search for network
folders
>and printers" and click "Apply". This setting can require you to manually connect
>to local network resources.
>
> Fast Find >
> If you have
MicroSoft's
>Office installed and have slow disk access problems, use
>target="_blank"> Kill Fast Find MS_158704 procedure to disable the problem
causing
>Fast Find function, and leave it that way.
>
> Update Drivers >
>
> Power Management >
> If your system
>hangs while you are a way from it, it could be due to default Power Management
>settings, which are a problem with Windows ME. To disable Hibernate, in Control
>Panel - Power Options - Hibernate tab, uncheck the "Enable hibernate support" option.
>Then on the Power Schemes tab, make sure the "System Stand by" option is set to
Never.
>It is also recommended that you go into the systems BIOS CMOS Settings and under
>Power Management Setup disable "ACPI function" and "PM control by APM".
>
> Shutdown Problems >
> If you still have
>random hangs and shutdown problems, and all else has failed to help, try using Micro$ofts
>procedures for trouble shooting
>target="_blank"> Windows ME Shutdown Problems.
>
>Security: 
>
>
> DELINDEX.bat >
> To really clean out unneeded Windows
>ME temp files, the IE temp files, cookies and index files (which have a history
>of every web site you have visited), and corrupted work files, get a copy of the
>
>DELINDEX.BAT file and place it on your C:\ drive. Then boot from a Windows
>ME Startup boot diskette and run the batch file per its instructions. It
will
>clear out INDEX.DAT files junk and free up disk space, so that the system and IE
>can run better. Make a Windows ME Start up diskette in Control Panel, Add/Remove
>Programs icon, Startup Disk tab.
>
> name="Security - SSDPRSRV - GRC - PcFlank" >
> To
improve
>Security and help protect your system from Trojans and Worms, first remove SSDPSRV
>which leaves port 1900 and 5000 open, as part of Universal Plug and Play. Go to
Start
>- Settings - Control Panel - Add/Remove Programs - Widows Setup tab - select Communications
>- Details - and un-check "Universal Plug and Play". Click OK,
OK
>and reboot system.
- Next go to the
>target="_blank"> Windows UpDate site and download
>the Security updates for Windows ME and your version of IE.
- Then go
to
> GRC.com and run
>target="_blank"> Shields UP tests. Read about security there and try
to
>follow advice on closing
>your ports.
- Additional advanced
>security testing, worm and trojan information and Firewall testing can be found
at
> PC Flank.com.
- Written in response to:
- Windows ME Fixes... (Jack Gulley: Thursday, December 18, 2003 at 3:08 am)
There are presently no replies to this message.
|
|
All messages in this thread [show all]
 |  | re: Windows ME Fixes... (jabuck: Thu, Dec 18, 2003, 8:46 am) |
| |
| |
Return to the Windows Me Discussion Forum
|
|
