|
|
|
re: Windows Me will not run for me
Wednesday, November 1, 2006 at 3:14 am
Windows Me Annoyances Discussion Forum
Posted by Kevin brunell
(2 messages posted)
Hi Larry,thank you for your initial advice.
I obtained a copy of the winME disk and went to install it.The scandisk opened and
checked the system and reported all was ok.
However when i continued with the process to re-install i got the message:
Standard mode:fault outside of ms-dos extender EC=0000 CS=031f IP=28D0 AX=00A0 BX=0080
CX=8080 DX=9FCO
SI=0080 DI=5830 BP=0136 DS=0277 ES=0317 SS=027F SP=01A8
I dont know what that is at all??
Also the command sfc /scannow is not recognised by dos when i use a boot disk.
I really dont know what the problem is.
On Tuesday, October 24, 2006 at 8:53 am, Larry wrote:
>Try and get your hands on an ME disk. Borrow one if you know someone who has one.
>While you're at it have them make you an ME startup floppy from their system and
>if possible make you a copy of their CD. Tell them you don't want their CD key number,
>just a copy of the CD. Or, find one cheap on Ebay. Run the System File Checker
(SFC).
>The command is "sfc /scannow" (without quotes of course). If it finds any missing
>or corrupted files it will replace them. Hopefully your system has a Certificate
>of Authenticity (CoA) sticker on it somewhere. That's the original installation
key
>number. If worse come to worse and you have to reinstall, any ME disk will work
with
>that number.
>
>
>
|
All messages in this thread [show all]
 | |  | re: Windows Me will not run for me (Kevin brunell: Wed, Nov 1, 2006, 3:14 am) |
| |
| |
Return to the Windows Me Discussion Forum
|
|
|
|
