|
|
|
re: Windows Me will not run for me
Wednesday, November 1, 2006 at 7:31 am
Windows Me Annoyances Discussion Forum
Posted by Larry
(1277 messages posted)
I don't know what all those error codes are either. Are you able to boot to a normal
desktop with the CD? If so, try running the sfc /scannow command from the Run command.
On Wednesday, November 1, 2006 at 3:14 am, Kevin brunell wrote:
>Hi Larry,thank you for your initial advice.
>I obtained a copy of the winME disk and went to install it.The scandisk opened and
>checked the system and reported all was ok.
>However when i continued with the process to re-install i got the message:
>Standard mode:fault outside of ms-dos extender EC=0000 CS=031f IP=28D0 AX=00A0 BX=0080
>CX=8080 DX=9FCO
>SI=0080 DI=5830 BP=0136 DS=0277 ES=0317 SS=027F SP=01A8
>
>I dont know what that is at all??
>Also the command sfc /scannow is not recognised by dos when i use a boot disk.
>I really dont know what the problem is.
>
>
>
|
All messages in this thread [show all]
 | | |  | re: Windows Me will not run for me (Larry: Wed, Nov 1, 2006, 7:31 am) |
| |
| |
Return to the Windows Me Discussion Forum
|
|
|
|
