re: My printer jams and slips
Monday, January 22, 2007 at 9:13 am
Windows Me Annoyances Discussion Forum
Posted by elmoticky
(25 messages posted)
Dear C.K., Thank you for your caring advise with
respect to printer problem. First, let me tell you
that perhaps you might not have read my last post
addressing that my problem was solved with a mere lubricating of some functioning
parts of the
printer. Second, you do not identify the type of
printer that you refer to as: "those that splash ink
all over the place", let me inform you that my printer has never done that. My problem,
actually
as described by Espson Service Manuel only needed
a bit of oil on certain spots. Everything is now O.K.
However, your message is greatly appreciated, and Thanks Again
Elmoticky
On Sunday, January 21, 2007 at 4:40 pm, C K wrote:
>Just a note.. If you have one of the Epson models known to blow an ink tube and
>splash ink all over the place, it's only a matter of time before it stops altogether.
> If this is the case, be ready to replace it... Normally, no printer should be
getting
>ink on the slide bar.. When it does, it usually means there is a problem.. (Been
>there, especially on those Epsons)
>
>
>
|
All messages in this thread [show all]
 | | | | | |  | re: My printer jams and slips (elmoticky: Mon, Jan 22, 2007, 9:13 am) |
| |
| |
Return to the Windows Me Discussion Forum
|
|
