re: canon bjc 2100 used ink tank is full? Tuesday, March 27, 2007 at 10:07 pm Windows Me Annoyances Discussion Forum Posted by dougdeep (14 messages posted) You can find a lot of information on printers at the www.fixyourownprinter.com user forums. I didn't see the exact same BJC 2100 mentioned but a search of "canon ink tank full" turned up the following procedure for several models of Canon inkjet printers: (1) Turn off the printer. (2) Press and hold the RESUME button, then press and hold the POWER button. (3) Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). (4) Release the POWER button. The printer's carriage will “reset" or move momentarily. If the above was properly performed the printer will enter the "Service Mode". (5) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press. (6) Press the POWER button to "set" the change. (7) Press the POWER button again to restart the printer. Check the forum to find out what the "tank" really is. Good luck. Written in response to: canon bjc 2100 used ink tank is full? (flower: Monday, March 26, 2007 at 9:19 pm) There are presently no replies to this message. All messages in this thread [show all] canon bjc 2100 used ink tank is full? (flower: Mon, Mar 26, 2007, 9:19 pm) re: canon bjc 2100 used ink tank is full? (dougdeep: Tue, Mar 27, 2007, 10:07 pm) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows Me Discussion Forum