Tip: Run a free scan for common Windows errors ad

re: SUReg Createkey failed Friday, August 24, 2001 at 11:32 am Posted by digsby (129 messages posted) Hello, scan the registry for errors go:Start>run>scanreg. what was the last thing you did before this started. Did you install new hardware? Check for conflict. Delete all the temp files. Perhaps you could also restore an earlier registry? digsby On Friday, August 24, 2001 at 9:41 am, Horace Fitzgerald wrote: > I received a warning error message:Windows has detected a registry/configuration >error. SUReg Create Key failed, (Enum\HTREE\ROOT\0). System either goes into Safe >Mode or it will start with a dialog box to Add New Hardware Wizard. The BOOTLOG.TXT >file displays,([000C5D85] Starting Unknown HTREE\RESERVED\0). How do I fix this problem? >System will not read Windows Me's bootable CD. [Reply or follow-up to this message] re: SUReg Createkey failed Friday, November 16, 2001 at 11:56 am Posted by RudySweet (1 messages posted) On Friday, August 24, 2001 at 9:41 am, Horace Fitzgerald wrote: > I received a warning error message:Windows has detected a registry/configuration >error. SUReg Create Key failed, (Enum\HTREE\ROOT\0). System either goes into Safe >Mode or it will start with a dialog box to Add New Hardware Wizard. The BOOTLOG.TXT >file displays,([000C5D85] Starting Unknown HTREE\RESERVED\0). How do I fix this problem? >System will not read Windows Me's bootable CD. [Reply or follow-up to this message] re: SUReg Createkey failed Saturday, November 17, 2001 at 7:42 am Posted by hams (1 messages posted) hi, similar prob. occured in my pc but system is not starting and in my pc even dos commands are also not working so, how do i run scanreg. command On Friday, August 24, 2001 at 11:32 am, digsby wrote: >Hello, >scan the registry for errors go:Start>run>scanreg. >what was the last thing you did before this started. Did you install new hardware? >Check for conflict. Delete all the temp files. >Perhaps you could also restore an earlier registry? > >digsby > > >On Friday, August 24, 2001 at 9:41 am, Horace Fitzgerald wrote: > I received a warning error message:Windows has detected a registry/configuration >error. SUReg Create Key failed, (Enum\HTREE\ROOT\0). System either goes into Safe >Mode or it will start with a dialog box to Add New Hardware Wizard. The BOOTLOG.TXT >file displays,([000C5D85] Starting Unknown HTREE\RESERVED\0). How do I fix this >problem? >System will not read Windows Me's bootable CD. [Reply or follow-up to this message] re: SUReg Createkey failed Thursday, June 6, 2002 at 2:56 pm Posted by nagesh singh (1 messages posted) unplug all the periferals & then run scanreg /fix in the command prompt....it should fix the problem.....i've tried it.....hope this helps u tooooooo. nagesh singh, bangalore :) [Reply or follow-up to this message] re: SUReg Createkey failed Wednesday, January 8, 2003 at 8:15 pm Posted by Jungle (1 messages posted) I have the same problem after I put a new video card but when I first installed the video card it was fine, then when I came back later and turned on the computer I had the same problem and I tired everything. If anyone knows how to fix this problem please help me! [Reply or follow-up to this message] re: SUReg Createkey failed Friday, July 18, 2003 at 12:39 pm Posted by Ryan007red (2 messages posted) The ME boot disk worked for me, running scanreg /fix. Thanks for all of the help guys. On Friday, November 16, 2001 at 11:56 am, RudySweet wrote: > > [Reply or follow-up to this message] re: SUReg Createkey failed Friday, June 4, 2004 at 2:59 pm Posted by morgan jones (1 messages posted) hi, i have found that this problem also occurs in situations where a hard disk has been formatted into to partitions. the error occurs after a month or two. the registry string corrupts or begins acting a little strange. i have found pulling up the boot sequence in setup, and booting from cd works. then dont delete a partition, but repair windows. or install on top of the original. it should solve the problem. any more help required e-mail me @ mogthesprog@hotmail.com On Wednesday, January 8, 2003 at 8:15 pm, Jungle wrote: >I have the same problem after I put a new video card but when I first installed the >video card it was fine, then when I came back later and turned on the computer I >had the same problem and I tired everything. If anyone knows how to fix this problem >please help me! [Reply or follow-up to this message] re: SUReg Createkey failed Wednesday, June 30, 2004 at 9:32 pm Posted by Ravi (1 messages posted) On a Windows ME computer, start the computer using the startup disk ( select the option, start computer without cd rom support ). On the command prompt type : scanreg/fix (to fix the registry problem.) If your computer is win98/win98SE : Start the computer to command prompt only and run the same command to fix the registry problem. [Reply or follow-up to this message] re: SUReg Createkey failed Friday, August 20, 2004 at 7:19 am Posted by andres guitron (1 messages posted) Please help me I had the same problem yesterday. My computer turned off due to high temp (fan problems). I have windows me. How do I enter scanreg /fix. It enters safe mode then scandisk then it is trying to search for new installed drivers and then the error SUReg Created Key failed appears (Enum\HTREE\0)thats it.When I enter into step by step it says that I had to run scanreg \fix however I dont now how. I can enter setup (F2) and HP diagnostics (F10) and if I hit ESC key then I can reboot from Hardisk or floppy or CDROM. I also can enter with F8 into safe mode, normal mode or step by step. My system recovery disk says that I have wrong notebook and then the prompt to A: appear, in the C: prompt scanreg is not recognized. Does a windows 98 start disk can help me? How do I start scanreg /fix. PLEASE HELP ME My laptop is HP PAVILION with ATHLON PROCESSOR On Thursday, June 6, 2002 at 2:56 pm, nagesh singh wrote: >unplug all the periferals & then run scanreg /fix in the command prompt....it should >fix the problem.....i've tried it.....hope this helps u tooooooo. > >nagesh singh, >bangalore > >:) [Reply or follow-up to this message] re: SUReg Createkey failed Sunday, January 23, 2005 at 11:22 am Posted by Alvin Fox (1 messages posted) Under run from startup menu I typed "scanreg", (scanreg\fix or scanreg/fix didn't work). The computer automatically fixed the register problem. Orignally I lost internect connection. On bootup it said it was looking for driver. On checking add hardware it said there was a problem with cd driver which there wasn't. On checking network the SUreg Create error came up. I fixed as above. However when I use add hardware now it sees a network driver and the original cd driver problem. So I may still have problems yet but at least the network is working. I won't worry about unless I see another problem. The whole thing started when I was having a problem copying a CD. Hope this helps. On Friday, August 20, 2004 at 7:19 am, andres guitron wrote: >Please help me I had the same problem yesterday. My computer turned off due to high >temp (fan problems). I have windows me. How do I enter scanreg /fix. It enters safe >mode then scandisk then it is trying to search for new installed drivers and then >the error SUReg Created Key failed appears (Enum\HTREE\0)thats it.When I enter into >step by step it says that I had to run scanreg \fix however I dont now how. > I can enter setup (F2) and HP diagnostics (F10) and if I hit ESC key then I can >reboot from Hardisk or floppy or CDROM. I also can enter with F8 into safe mode, >normal mode or step by step. >My system recovery disk says that I have wrong notebook and then the prompt to A: >appear, in the C: prompt scanreg is not recognized. Does a windows 98 start disk >can help me? How do I start scanreg /fix. PLEASE HELP ME >My laptop is HP PAVILION with ATHLON PROCESSOR > > [Reply or follow-up to this message] re: SUReg Createkey failed Saturday, March 5, 2005 at 12:09 pm Posted by Veovis (1 messages posted) My computer is an older model. This error occured this morning and now the computer wont load further than the Scandisc when ME loads up in safe mode. It wont provide me an active desktop, and theres no way to get to the start menu to get into any directories. When going through the step-by-step method or attempting to enter DOS, It wont allow me to proceed further than the bootlog. On Sunday, January 23, 2005 at 11:22 am, Alvin Fox wrote: >Under run from startup menu I typed "scanreg", (scanreg\fix or scanreg/fix didn't >work). The computer automatically fixed the register problem. > >Orignally I lost internect connection. On bootup it said it was looking for driver. >On checking add hardware it said there was a problem with cd driver which there wasn't. > On checking network the SUreg Create error came up. I fixed as above. However when >I use add hardware now it sees a network driver and the original cd driver problem. >So I may still have problems yet but at least the network is working. I won't worry >about unless I see another problem. The whole thing started when I was having a problem >copying a CD. Hope this helps. > > > > > [Reply or follow-up to this message] re: SUReg Createkey failed Wednesday, April 13, 2005 at 11:44 am Posted by Annoyed (18 messages posted) This thread looks kind of old. I referenced the original question at http://www.annoyances.org/exec/forum/winme/1113407447 . Hope this helps you solve our mutual problem swiftly. [Reply or follow-up to this message] re: SUReg Createkey failed Wednesday, April 13, 2005 at 11:08 pm Posted by Annoyed (18 messages posted) The problem turned out to be missing references to HTREE in Bootlog.txt http://securityresponse.symantec.com/avcenter/venc/data/pf/does.a.refere nce.to.htree.in.bootlog.txt.indicate.a.virus.html If you can run scanreg from dos, you may be able to get to an earlier verasion of your registry and the system should launch [Reply or follow-up to this message] Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows Me Discussion Forum