re: Question about 'Adjust Your Printer Timeout' Thursday, August 7, 2008 at 7:47 am Windows Vista Annoyances Discussion Forum Posted by Jacob6601 (2174 messages posted) I would look in the BIOS first to see if there is an APM (power management) setting in there. Disable it and test the pc. That is the usual culprit. You can create a new power profile for the next steps: Go through the control panel --> power and set it to never sleep. Leave the monitor set to turn off. Test. There are advanced settings if you wish to play with them. Maybe simply disabling power saving to the printer port and/or hard drive will resolve this. If this is a laptop note that these higher power settings are only required during the plugged in state (when the printer is attached). Written in response to: Question about 'Adjust Your Printer Timeout' (Charles Brewster: Tuesday, August 5, 2008 at 4:10 pm) There are presently no replies to this message. All messages in this thread [show all] Question about 'Adjust Your Printer Timeout' (Charles Brewster: Tue, Aug 5, 2008, 4:10 pm) re: Question about 'Adjust Your Printer Timeout' (fastfreddie1959: Thu, Aug 7, 2008, 7:22 am) re: Question about 'Adjust Your Printer Timeout' (Jacob6601: Thu, Aug 7, 2008, 7:47 am) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows Vista Discussion Forum