Annoyances.org
Home » Windows Vista Discussion Forum » Message 1206540725 » Entire Thread Search | Help | Home
  
Power Failure Question
Showing all messages in thread #1206540725
Windows Vista Annoyances Discussion Forum


The following are all of the messages in this thread (4 in all), shown in chronological order. Click any message subject to view that message by itself or to view the thread hierarchy.
Power Failure Question
Wednesday, March 26, 2008 at 7:12 am
Posted by Arthur (61 messages posted)

My computer runs fine when it is turned on, but it has recently been crashing after ~45min to an hour of being turned on. After the crash you cannot turn it back on again unless you unplug the power cord from the psu and plug it back in (even so after it has been turned off and unplugged from the wall for several hours. I don't think the OS matters for the problem, but in case it does I have winXP Home. All help is welcomed, Thanks in advance, Arthur

[Reply or follow-up to this message]

re: Power Failure Question
Wednesday, March 26, 2008 at 8:06 am
Posted by MartinM (2561 messages posted)

This is the Vista forum (!) but as you say I don't think it matters. Almost certainly you have an overheating CPU. Check the airways are unobstructed (by a wall next to the system box for instance) clear and dust free, that the fans are working, and that the CPU is properly seated on to its heat sink. Then off to a hardware forum, technical friend or repair shop.

[Reply or follow-up to this message]

re: Power Failure Question
Wednesday, March 26, 2008 at 9:06 am
Posted by Alan (84 messages posted)

Or, a power supply unit (PSU) that is overheating.  Martin's point might be valid, 
too. Check to make sure all fans are working and nothing is obstructed with dust, 
wires, mice nests, etc.  :)

If you have access to another PSU, try switching it out and see what happens. Otherwise, 
yes, it might be time for the repair shop.

[Reply or follow-up to this message]

re: Power Failure Question
Thursday, March 27, 2008 at 11:37 am
Posted by Charlie Hadden (405 messages posted)

Power supply is more likely. Specifically the MOV's that prevent overloading. If nothing else fixes it, find, beg, borrow another supply from the kid next door that has more used parts than he has sense and see if that does the trick.

[Reply or follow-up to this message]

Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread
Return to the Windows Vista Discussion Forum

All content at Annoyances.org is Copyright © 1995-2008 Creative Elementtm All rights reserved.
Please do not plagiarize; redistributing these pages without permission is strictly prohibited.