|
|
|
re: network
Friday, July 26, 2002 at 1:18 am
Windows XP Annoyances Discussion Forum
Posted by joe
(53 messages posted)
run ipconfig from command prompt in xp and winipcfg in 98 command prompt.
also go to run line and type \\computer name of other machine on the network and
come back with the results from both machines trying to reach the other machines.
workgroups must be the same in both ,and ip addresses must be almost the same with
just the fourth set of octects differing for communication to work. example is as
follows 192.168.0.1 xp
me 192.168.0.2 me
if the first 3 sets dont match they will not communicate over the network thru tcp/ip
and you will need to add nwlink ipx/spx to both.
On Thursday, July 25, 2002 at 7:54 pm, Mike wrote:
>I have a question about Connect
>to a Windows XP or 2000 system with a Windows 95, 98, or Me system over a Network:
>
>
>I have 2 computers, one with Windows XP and the other Windows ME. I also have a
router
>setup for the 2 computers to connect to the internet. My problem is I can not see
>either computer in My Network Places. I ran the network wizard as stated in XP.
Any
>help sure would be appreciated.
- Written in response to:
- network (Michael: Thursday, July 25, 2002 at 7:54 pm)
Responses to this message:
 | re: network (mejayne: Friday, July 26, 2002 at 10:41 am) |
|
|
All messages in this thread [show all]
 | network (Michael: Thu, Jul 25, 2002, 7:54 pm) |
 | | re: network (joe: Fri, Jul 26, 2002, 1:18 am) |
| |
| |
Return to the Windows XP Discussion Forum
|
|
|
|
