|
|
|
re: Question about 'Making Sure the Correct HAL is Installed'
Friday, December 6, 2002 at 4:12 am
Windows XP Annoyances Discussion Forum
Posted by Oxyandy
(1 messages posted)
When Windows XP won’t powerdown automatically, the APM/NT Legacy Power Node may not
be enabled. To enable this, right-click on the My Computer icon, click Properties
| Hardware | Device Manager | View. Check the box labeled “Show Hidden Devices.”
If it’s available on your computer, there will be a red X on the APM/NT Legacy Node.
Try enabling it and see if this resolves the powerdown problem (Tip from Terri Stratton).
Or, to check the other side of the APM/ACPI coin, open the Power Options applet in
Control Panel. If there is an APM tab, make sure the “Enable Advanced Power Management
Support” box is checked. (MSKB Q313290)
On Tuesday, October 22, 2002 at 10:46 pm, Shibis wrote:
>I have a question about Making
>Sure the Correct HAL is Installed:
>
>
>If you see it is now safe to shutdown your computer and you are using XP, you have
>a network problem.. To fix that, "do it or not it is up to you," follow this steps...
>1- START
>2-SETTINGS
>3- CONTROL PANNEL
>4- SYSTEM
>5- HARDWARE
>6- DEVICE MNGR
>7- VIEW"@ THE TOP MENU, SECOND OPTION."
> * scroll it down, and you will see a red x on NT and something like that"i can't
>remember all of it." Highlight that then @top you have icons which stands for disable,
>enable* you need to enable" it is a small computer Icon."
>The red X will dissapear.. try it to shutdown.. Wallaaaaaaaaa, Problem solved..
Have
>a nice day... and contripute your ideas to annoyances.org.... Anyway you had had
>a Network problem and it is been solved...
|
All messages in this thread [show all]
 |  | re: Question about 'Making Sure the Correct HAL is Installed' (Oxyandy: Fri, Dec 6, 2002, 4:12 am) |
| |
| |
Return to the Windows XP Discussion Forum
|
|
|
|
