|
|
|
re: Using Nero In-CD in Windows XP?'
Friday, December 27, 2002 at 9:08 pm
Windows XP Annoyances Discussion Forum
Posted by Michael
(2 messages posted)
I just received this from Ahead Tech support:
Dear Customer,
Please use the following troubleshooting tips.
This is normally caused by driver conflicts. Please take
the following steps:
a) Upgrade to the latest InCD from our web site at www.nero.com/en/download.htm
b) Go to your Windows Explorer or My Computer and right click on your Recorders
drive letter, and then go to the "Recorder" Tab and in that window disable the option
for "Enable Recording on this Drive".
c) On some systems InCD will have trouble with Windows Media Player, because
it uses an Adaptec driver that can conflict with InCD. To resolve this, go to your
Control Panel's Add/Remove Programs feature and uninstall the Windows Media Player
program. Then reinstall Windows Media Player, but without the Adaptec driver component.
d) Make sure there are no programs running in the background before you try
the format with InCD. And make sure to use Nero to do a FULL erase on the CDRW media
before you format with InCD.
e) Try with DMA enabled and disabled for your CD Recorder and CDROM/DVDROM drives.
To do this go to your Control Panel->Systems->Hardware->Device Manager and from
there double-click on the IDE ATA/ATAPI Controllers. Right-click on the Primary IDE
Channel and go to Properties>Advanced Settings, and change Transfer Mode to "DMA
if available". Do the same for the Secondary IDE Channel
f) Disable the "PowerSave" feature for your computer before formatting. This
may cause the recorder to disconnect during the format process, and thereby causing
InCD to error out.
g) If you are able to format the CDRW media, but after the format it fails to
mount, or mounts but will not allow you to write to the CDRW as it reports 0MB of
space available on the CD, this is caused 90% of the time by old firmware for your
recorder. Or the below drivers.
Locate the below drivers and rename to .bac extensions and reboot...
Cdudf_XP.sys
Udfreadr_XP.sys
On Thursday, December 26, 2002 at 10:01 pm, Gary wrote:
>I am using ver 3.3.6 with XP pro and it seems to be working Ok except that when
>I load a formatted CD-RW, the eject button will not work on my drive. Ihave to right
>click on the CD icon and do an eject in software. Is it Nero/XP or my drive?
>
>
|
All messages in this thread [show all]
 |  | | | | | | | | |  | re: Using Nero In-CD in Windows XP?' (Michael: Fri, Dec 27, 2002, 9:08 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|
|
|
