|
|
|
re: Using Nero In-CD in Windows XP?'
Friday, December 27, 2002 at 9:59 pm Windows XP Annoyances Discussion Forum
Posted by Gary
(2 messages posted)
Thanks for passing along the tips although that did not solve problem. I placed
a shortcut on the desktop so it is relatively easy to do an eject from there, just
an annoyance that the button doesnt work. Formats are OK
On Friday, December 27, 2002 at 9:08 pm, Michael wrote:
>I just received this from Ahead Tech support:
>
>Dear Customer,
>
>
>
>Please use the following troubleshooting tips.
>
>
>
> This is normally caused by driver conflicts. Please take
>the following steps:
>
>
>
>
>
>a) Upgrade to the latest InCD from our web site at www.nero.com/en/download.htm
>
>
>
>b) Go to your Windows Explorer or My Computer and right click on your Recorders
>drive letter, and then go to the "Recorder" Tab and in that window disable the option
>for "Enable Recording on this Drive".
>
>
>
>c) On some systems InCD will have trouble with Windows Media Player, because
>it uses an Adaptec driver that can conflict with InCD. To resolve this, go to your
>Control Panel's Add/Remove Programs feature and uninstall the Windows Media Player
>program. Then reinstall Windows Media Player, but without the Adaptec driver component.
>
>
>
>d) Make sure there are no programs running in the background before you try
>the format with InCD. And make sure to use Nero to do a FULL erase on the CDRW media
>before you format with InCD.
>
>
>
>e) Try with DMA enabled and disabled for your CD Recorder and CDROM/DVDROM
drives.
> To do this go to your Control Panel->Systems->Hardware->Device Manager and from
>there double-click on the IDE ATA/ATAPI Controllers. Right-click on the Primary
IDE
>Channel and go to Properties>Advanced Settings, and change Transfer Mode to "DMA
>if available". Do the same for the Secondary IDE Channel
>
>
>
>f) Disable the "PowerSave" feature for your computer before formatting. This
>may cause the recorder to disconnect during the format process, and thereby causing
>InCD to error out.
>
>
>
>g) If you are able to format the CDRW media, but after the format it fails
to
>mount, or mounts but will not allow you to write to the CDRW as it reports 0MB of
>space available on the CD, this is caused 90% of the time by old firmware for your
>recorder. Or the below drivers.
>
>
>
>Locate the below drivers and rename to .bac extensions and reboot...
>
>
>
> Cdudf_XP.sys
>
> Udfreadr_XP.sys
>
>
>
|
All messages in this thread [show all]
 |  |  |  |  |  |  |  |  |  |  |  | re: Using Nero In-CD in Windows XP?' (Gary: Fri, Dec 27, 2002, 9:59 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|
|
|