re: irql not less or equal SOLUTION???
Thursday, January 2, 2003 at 11:05 pm Windows XP Annoyances Discussion Forum
Posted by David
(1 messages posted)
So what you are suggesting is to shut down the comp, remove both cards(NVIDIA and
capture card, reboot, shut down, install NVIDIA, reboot, fully install, shut down,
install capture card, then start and fully install. And this should remove the message
of the IRQL driver failure?
On Tuesday, December 31, 2002 at 7:03 am, Walter wrote:
>1. Well, RAM are not broken, but they just dont go well
>with your motherboard. 2. If you have downloaded a wrong bios update it may happen
>that you must throw away your mainboard! (Im sure there was a warning near the download
>section telling you that it is dangerous). 3. You cannot change IRQs in WinXP 4.
>You can go into Bios and disable IRQs, that you don't need there (e.g. I haven't
>occupied my serial ports and my ltp port, so I disabled it in my BIOS). 5. Why don't
>you ask a friend or a computer dealer you know to loan you Kingston, Samsung, Infineon
>or other quality RAM?
>
So what you are suggesting is that if I remove both the NVIDIA and capture card,
place the NVIDIA card in, make certain it runs OK, the shut down and install the
capture card then?
|
All messages in this thread [show all]
 |  |  |  |  | re: irql not less or equal SOLUTION??? (David: Thu, Jan 2, 2003, 11:05 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|