re: Scanner driver disappears after installing in XP HE
Monday, January 13, 2003 at 9:39 pm Windows XP Annoyances Discussion Forum
Posted by Steve
(21 messages posted)
Wiring configuration is [PrinterPort to Scanner to
Printer] ??
wasn't aware you could do that without a switch ...
but if you say so..could and most probally is a bad cable if your printer is working
and the scanner isn't
try changing the cables and see what that does..
On Monday, January 13, 2003 at 7:54 pm, Niistoo wrote:
>I have a Dexxa 4800 scanner and am running XP Home Edition. After running the install
>software I reboot, yet there is no recognition of the scanner at startup or at any
>time afterward. Error messages are absent. Device Manager does not indicate any
>problems and does not show the scanner at all. Wiring configuration is [PrinterPort
>to Scanner to Printer]. BIOS parameters for LPT1 are set to "Auto". I tried setting
>LPT1 to "ECP/EPP" without success before returning it to the "Auto" setting. I've
>tried using the "Add/Remove Hardware" wizard in Control Panel, but it does not detect
>the scanner. The scanner was working fine until one day XP just decided to "forget"
>the scanner. Any suggestions?..
|
All messages in this thread [show all]
 |  | re: Scanner driver disappears after installing in XP HE (Steve: Mon, Jan 13, 2003, 9:39 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|