re: Scanner driver disappears after installing in XP HE
Monday, January 13, 2003 at 10:29 pm Windows XP Annoyances Discussion Forum
Posted by Tom Swanson
(5553 messages posted)
You may have done this already; disconnect the printer and start your computer. That
should force it to find the scanner. If so connect the printer up again, or go to
a switching device. Have you checked to be sure all your cables are standard for
bidirectional communication. Old printer cables were a different standard.
On Monday, January 13, 2003 at 7:54 pm, Niistoo wrote:
>I have a Dexxa 4800 scanner and am running XP Home Edition. After running the install
>software I reboot, yet there is no recognition of the scanner at startup or at any
>time afterward. Error messages are absent. Device Manager does not indicate any
>problems and does not show the scanner at all. Wiring configuration is [PrinterPort
>to Scanner to Printer]. BIOS parameters for LPT1 are set to "Auto". I tried setting
>LPT1 to "ECP/EPP" without success before returning it to the "Auto" setting. I've
>tried using the "Add/Remove Hardware" wizard in Control Panel, but it does not detect
>the scanner. The scanner was working fine until one day XP just decided to "forget"
>the scanner. Any suggestions?..
|
All messages in this thread [show all]
 |  | re: Scanner driver disappears after installing in XP HE (Tom Swanson: Mon, Jan 13, 2003, 10:29 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|