re: Scanner driver disappears after installing in XP HE
Tuesday, January 14, 2003 at 7:17 pm Windows XP Annoyances Discussion Forum
Posted by Bob Harris
(992 messages posted)
First, have you verified with the scanner manufacturer that this model is supposed
to work with XP? Not all hardware is usable under XP.
Next, I have had bad luck trying to put more than one device on a parallel port,
without a switch box. Yes, I have seen hardware that "claims" to let you "pass through",
but these are not always reliable. Try connecting only the scanner to the parallel
port and see if that helps.
On Monday, January 13, 2003 at 7:54 pm, Niistoo wrote:
>I have a Dexxa 4800 scanner and am running XP Home Edition. After running the install
>software I reboot, yet there is no recognition of the scanner at startup or at any
>time afterward. Error messages are absent. Device Manager does not indicate any
>problems and does not show the scanner at all. Wiring configuration is [PrinterPort
>to Scanner to Printer]. BIOS parameters for LPT1 are set to "Auto". I tried setting
>LPT1 to "ECP/EPP" without success before returning it to the "Auto" setting. I've
>tried using the "Add/Remove Hardware" wizard in Control Panel, but it does not detect
>the scanner. The scanner was working fine until one day XP just decided to "forget"
>the scanner. Any suggestions?..
|
All messages in this thread [show all]
 |  | re: Scanner driver disappears after installing in XP HE (Bob Harris: Tue, Jan 14, 2003, 7:17 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|